Summary of Contents for pet-peeps PP306BZ
- Page 1 THE FOLLOWING IS A DETAILED STEP BY STEP SETUP INSTRUCTION SETUP FOR PP306BZ + PP307BZ OUTDOOR PETCAMS USING THE ‘PET - PEEPS’ APP First things first. Let’s start with a clear slate and reset your PetCam.
- Page 2 IMPORTANT: Your device (iPhone or iPad) MUST be on the same wifi network as you want to connect your PetCam to. 1. Open the Pet-Peeps app and select “Add Camera” on the top right of the screen.
- Page 3 2. After selecting Add Camera options will appear at the bottom of the screen to “Setup new camera” and “Connect to existing.” 3. Select “Setup new camera” 4. Your screen will now display a live image from your devices camera so you can scan the QR Code located on the bottom of the camera.
- Page 4 8. Under your wifi network name enter your wifi Password. This is key to setting up your PetCam. Confirm that the wifi password you enter is the most current password that will allow your PetCam to connect. 9. On the next line enter a new Username of your choice that is a minimum 6 letters or numbers long.
- Page 5 16. Once the sprocket icon is selected it will take you to a “SETTINGS” page with several options listed. 17. Choose the 1 option “Wifi” 18. Once “Wifi” is selected the page will change. Allow a few moments for your wifi network to display in the top section directly under the words “Current Network.”...
- Page 6 22. At this point your PetCam is connecting properly to your wifi network and you’re ready to move your PetCam to any location within range of your wifi signal and begin using your PetCam from anywhere. 23. NOTE: If you move to a location and cannot connect to your PetCam try quitting the app and relaunch it on your iPhone or iPad.