charby ORBIT Quick Start Manual

01
PRODUCT DIAGRAM
Watch Charging Surface
Power Button
Kickstand
Fill Light
MagSafe Charging
®
Surface
02
HOW TO USE
How to charge your devices
Devices
Smartphone
Apple Watch
®
Earbuds
USB-C Port
Press the power button to start wireless charging.
01.
(Input/Output)
Alternatively, use the USB-C Port for wired charging.
02.
Status LED If Watch Charging Surface does not start charging while MagSafe
03.
Charging Surface is in use, press the power button once.
How to recharge Orbit Power Bank
Connect the USB-C Port to a wall charger using a USB-C cable.
01.
Switch on the wall charger to start charging.
02.
How to use the fill light
Double press the power button to switch on.
01.
There are 3 levels of brightness. Each single press will increase the
02.
level by 1.
To switch it off, double press the button again or single press
03.
continuously until it's turned off.
Additional Info
LED Color
Battery Capacity LED
Green
100%
Red
75%
50%
Orbit Power Bank will automatically switch off after 30s of idling.
01.
25%
It can charge 3 devices at once through MagSafe
02.
Surface, Watch Charging Surface, and USB-C port.
The USB-C port is both an input and output port.
03.
It supports pass through charging. You may recharge it through its
04.
USB-C port while both MagSafe
use.
Method
Attach it to MagSafe Charging Surface
®
Attach it to Watch Charging Surface
Place the wireless charging case on MagSafe
®
Charging Surface
®
Status
Charging / Recharging
Foreign object detected on wireless surfaces
Charging
®
& Watch charging surface are in
®
www. charbycharge.com/warranty
Join our community and receive member exclusive offer.
What's more, you also get a free upgrade to
1-year premium warranty.
The product is compatible with MagSafe . For non-MagSafe
®
or phone casings, use Orbit Pad to enable magnetic attachment.
We welcome any questions or suggestions for improvement.
You can contact us in the following ways:
Email: support@charbycharge.com
Facebook: facebook.com/charbycharge
phones
®