Advertisement
Available languages
Available languages
Quick Links
MODEL #: JAE022
JAE022-T20
(LED bulb included)
TABLE LAMP
IMPORTANT SAFETY INSTRUCTIONS
Read and Save:
1. To reduce the risk of electric shock, this lamp has a
polarized plug (one blade is wider than the other ).
The plug will fit in a polarized outlet only one way. If the
plug does not fit fully into the outlet, reverse the plug.
If plug still does not fit, contact a qualified electrician.
Never use an extension cord unless the plug can be
fully inserted. Do not alter the plug.
2. Do not install non-factory wiring or any other electrical
components. Altering or modifying the lamp in any way
will render the product unsafe.
3. Avoid laying objects directly over the power supply cord
to avoid cutting or damaging the wire.
4. Keep curtains, shades, wall hangings and all other fabrics
and objects away from the lamp shade, light switch and
the light bulb. Lamps are not designed to support
additional weight. Do not hang any objects from the
lamp or any lamp part.
5. Place the lamp on a stable, level surface in an area
where the lamp will not be tipped over or bumped.
6.
This lamp is approved for indoor use only.
BULB REPLACEMENT
Use one 150 Watt, Type A, 3-Way bulb or equivalent
LED equivalent bulb.
DO NOT EXCEED RECOMMENDED BULB WATTAGE.
1. Turn off and unplug the lamp and allow bulb to cool
before replacing bulb.
2. Light bulb should never touch the lamp shade.
CLEANING AND MAINTENANCE
1. To clean: use a soft, dry cloth only.
2. Do not use chemical or abrasive cleaning solutions.
A
1. Place the base (A) on a flat surface, gently pull
additional cord from lamp base (A).
2. Insert and thread socket assembly (B) into the lamp
base (A) until secure.
3. Install the light bulb into the socket assembly (B).
4. Pinch and insert harp (C) into the harp fittings on
socket assembly (B). Slide the caps on harp (C) over
the fittings on socket assembly (B) to secure.
5. Remove the finial (E) from the harp (C).
6. Place the shade (D) on the harp (C), and then secure
with the finial (E).
7. Insert plug into an electrical outlet.
8. Use the rotary switch on socket assembly (B) to adjust
light from low, medium, high, and off intensity.
For Customer Assistance:
www.jalexanderhome.com
Made in China
ASSEMBLY INSTRUCTIONS
E
D
C
B
Advertisement
Related Manuals for JALEXANDER JAE022
Summary of Contents for JALEXANDER JAE022
- Page 1 MODEL #: JAE022 JAE022-T20 (LED bulb included) TABLE LAMP IMPORTANT SAFETY INSTRUCTIONS Read and Save: 1. To reduce the risk of electric shock, this lamp has a polarized plug (one blade is wider than the other ). The plug will fit in a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug.
- Page 2 MODÈLE #: JAE -T20 ( Ampoule incluse) LAMPE DE TABLE INSTRUCTIONS DE SÉCURITÉ IMPORTANTES À LIRE ET À CONSERVER 1. Pour diminuer le risque de choc électrique, cette lampe a une fiche polarisée (une lame est plus large que l’autre). La fiche entrera dans une prise polarisée d’une seule façon.
- Page 3 MODELO #: JAE022 JAE022-T20 ( Bombilla LED incluida) LÁMPARAS DE MESA INSTRUCCIONES DE SEGURIDAD IMPORTANTES Leer y conservar: Esta lámpara tiene un enchufe polarizado (con una pata más ancha que la otra), para reducir el riesgo de descarga eléctrica. El enchufe sólo puede ser insertado en una toma de corriente polarizada de una forma.
- Page 4 Consumer Service Servicio al Consumidor Service aux consommateurs http:// www.jalexanderhome.com LIMITED WARRANTY J Alexander warrants all of its lamps against defects in materials and workmanship for one (1) year from the date of original purchase. Any light bulbs provided with products are warranted for 30 days from the date of original purchase. This warranty does not cover parts becoming defective due to misuse, accidental damage, improper handling and/or installation and specifically excludes liability for indirect, incidental or consequential damages.