RADIVA Arno Assembly Instructions

WARRANTY CONDITIONS
Warranty Period shall start on the date of invoice of the product and is 5 years.
1- All of the products, including all of its parts, are under the warranty of our company.
2- In case that the product becomes defective during warranty period, the period to elapse in repair shall be added to the warranty
period. Delivery period for the product shall be 30 business days. This periods starts from the date of delivery of the product to the
service station, or, in the lack of service station, to any of the seller, dealer, agency, representative, importer or exporter of the
product. In case that the defect of the industry product could not be corrected in 15 days, the importer or exporter is required to
allocate to the use by the consumer another product that has similar specifications until the repair of the product is completed.
3- In case that the product becomes defective due to material or production errors within the warranty period, it shall be repaired
without claiming for any workmanship cost, cost of replaced part or any other charge under any name whatsoever.
4- In spite of the consumer using the right of repair, if the product
a)becomes defective for the same fault more than twice in the same year following the date of delivery to the consumer, or
different defects occur more than four times, provided that these shall remain within the warranty period specified, or is the sum
of difference defects within the specified warranty period is more than six times, and additionally these defects make inability to
use the product continuous,
b)the maximum period required for repair is exceeded,
c)the company does not have a service station;
upon the agreement of the producer and if it is determined that it is not possible to repair the defect with a report to be prepared
one of the seller, dealer, agency, representative, importer or exporter of the product in the same order, the consumer may as for
free replacement of the product, return the price thereof, or ask for discount equal to the rate of defect.
5- All these warranty conditions are applicable if there are no issues which exclude the product from warranty scope.
ISSUES WHICH EXCLUDE THE PRODUCT FROM WARRANTY SCOPE
1- Using the product in violation of and/ or without respect to the issues specified in the Assembly and Operating Manual,
2- Using well water, or water which has a value exceeding the PH (min 6.5 - max 8), total hardness (max. 25 Fr), chloride (max 500
ppm) limits, which is deforming, corrosive, calcifying in the installation during the initial start-up or thereafter even for testing
purposes, ,
3- Using substances such as inhibitor, anti-freeze, pH regulator, anti-calcification and anti-bacterial, chemical claimed to increase
radiator efficiency etc. without written approval of RADİVA.
4- Not making the building and installation grounding in accordance with regulations,
5- Making erroneous installation or faulty mounting not in compliance with the installation technique,
6- Not using pressure reducer in installations where water input pressure is higher than 10 bars,
7- Finding corrosive and clogging substances such as sand, construction debris, plaster etc. in the installation water,
8- Defects that occur with the freezing of the installation water,
9- Damages that occur due to falling and colliding during loading, transportation, unloading, stocking or mounting.
10- Trying to clean the radiators with hard or corrosive cleaning substances, and defects that occur on the surface for that reason,
11- The product being exposed to corrosive effect arising from storage conditions at the construction site prior to mounting, or
being impacted etc.
12- Failure to present the warranty document, or making any alteration on the warranty document, shall exclude the product from
warranty scope.
For any disputes with regard to warranty period, the invoice date shall be taken as basis and it is necessary to present the invoice. .
RADİVA ISI SİSTEMLERİ SAN VE TİC LTD. ŞTİ.
Head Office: Esenyalı Mah. E-5 Yanyol Cad. Varyap Plaza
No:61 D:178 Pendik / İSTANBUL
Warehouse: Organize cad. No:3 Alt kat Depo-1 Balçık
Köyü-Gebze / KOCAELİ
+902164698406 Web:www.radiva.com.tr
Number
Date, Stamp and Signature
Assembly Instructions
Part Quantity
1 45
2 65
3 45
4 65
5 65
6 45
7 1
Model A (mm) Aks (centres) (mm)
Arno 45 H - 50
Oti 65 H - 50
Bia 45 H - 50
Tano 65 H - 50
Kotto 65 H - 50
Mati 45 H - 50
C (mm) E (mm)
W - 175 H - 110
W - 175 H - 110
W - 140 H - 110
W - 140 H - 110
W - 120 H - 135
W - 165 H - 110