Advertisement
Quick Links
USER
Camshelving
®
Ultimate Sheet Pan Rack
MANUAL
STOP!
Do not remove panel tie straps until
after the bottom frame is installed.
Open this User Manual for full directions.
¡ ALTO!
No rompa las ataduras plásticas del
panel hasta que el marco inferior
haya sido instalado. Abra este manual
del producto para instrucciones.
Advertisement
Related Manuals for Cambro Camshelving Ultimate Sheet Pan Rack
Summary of Contents for Cambro Camshelving Ultimate Sheet Pan Rack
- Page 1 USER Camshelving ® Ultimate Sheet Pan Rack MANUAL STOP! Do not remove panel tie straps until after the bottom frame is installed. Open this User Manual for full directions. ¡ ALTO! No rompa las ataduras plásticas del panel hasta que el marco inferior haya sido instalado.
- Page 2 Use Rubber Mallet 1 Bottom Post for Assembly Connector Frame Half Size Rack Use Clippers to Remove Tie Straps (After Step 1 is Complete) 16 Post Connector 4 Casters Frame Wedges Zinc Premium Plastic Scan for Assembly Video Undercounter Rack COMPONENT www.cambro.com...
- Page 3 Assembly Instructions Step 1: Install Bottom Post Connector Frame IMPORTANT! Do not remove tie straps until after bottom frame is installed.
- Page 4 Step 2: Install Top Post Connector Frame Clip ALL tie straps first and move rail panels down.
-
Page 5: Install Casters
Step 3: Install Casters If threaded insert set has come loose from the caster stem, follow these steps. Then proceed to 1 below. -
Page 6: Care And Maintenance
• Camshelving Ultimate Sheet Pan Racks are warrantied against rust and corrosion on mobile posts (with Premium Plastic Casters) and rail panels. • Camshelving Ultimate Sheet Pan Rack Mobile Posts with Zinc Casters are NOT warrantied against rust and corrosion.