Page 2
® Network Attached Storage HARDWARE Front HDD1 LED HDD2 LED POWER LED Back Gigabit Ethernet Port DC Power Port(12V) (No power switch) SETTING UP THE BLACKJACK NAS Connecting to BlackJack Server 1Gbps Switch Connect to power source. Recommend to connect directly to UPS STEP 1: Connecting the power cable.
Page 3
® Network Attached Storage STEP 2: Connecting to the Network 1. Locate the network switch where the DW Spectrum IPVMS server is connected to. ® (Blackjack NAS must be on the same network as the DW Spectrum IPVMS server where it will be added to). 2.
Page 4
ect network from the dropdown list. under the IP Conf column. Find the BlackJack NAS from the list, then either double click on the ® under the IP Conf column. ither double click on the or click on Network Attached Storage 4. If the BlackJack NAS is not listed, change the Network* by clicking the drop down and select 4.
Page 5
2. Right click on the server name listed on the Resources then click Server Settings. on the Desktop or click on DW Spectrum from Start > All Program > Digital Watchdog. 2. Login to the server where the Blackjack NAS will be connecting to.
Page 6
® Network Attached Storage 3. Click Add External Storage. 4. From Storage Management tab, click Add External Storage. 3. Click Add External Storage. 4. Input the URL of volume 1 5. Input the URL of volume 1 from Step3-7 E.g. \\192.168.1.152\Recording1 4.
Page 7
® Network Attached Storage 6. Input the login name and the password then click OK. 5. Input the login name and the password then click OK. NOTE Default login Information NOTE: Default login Information Login : admin, Password: admin1234 Login : admin, Password: admin1234 6.
Blackjet nas dw-bjnas8trBlackjet nas dw-bjnas6tBlackjet nas dw-bjnas12trBlackjet nas dw-bjnas10tBlackjet nas dw-bjnas20trBlackjet nas dw-bjnas12t...
Show all