BARTON TOOLS LZ-240C Instruction Manual

C
ompany information
LZ Plug in Hydraulic Pliers
Repair and Maintenance
◎ Your tool is a product with excellent design and craftsmanship. You must
not disassemble the internal parts at will.-All damage caused by the user's
unauthorized disassembly or improper use is not covered by the warranty
service, but it can be paid for the user Repair (only charge the cost of parts).
◎ Keep tools and spare parts dry. Rain, humidity, and various liquids or
moisture may corrode tool housings, metal surfaces and electronic
circuits.If the tool gets wet, please remove the battery and wait until the tool
is completely dry before reinstalling the battery.
◎ Do not store tools in cold or hot places. Too cold or too hot will deform
the plastic parts of the tool, shorten the life of electronic components, and
damage the battery.
◎ Do not use strong chemical cleaning agents or strong detergents to
clean the tools.
◎ In order to ensure the service life of the tool, it is recommended to
replace the hydraulic oil in the tool once a year.
◎ When the tool is left unused for a long time, please reset the piston to
the bottom, wipe the surface of the tool clean, and evenly apply anti-rust
grease on the metal surface of the crimping mold and tool, and put it in the
tool box for storage.
www.barton-tools.com
Instruction Manual of LZ-240C/300C/400C
Plug in Hydraulic Pliers
◎ For your safety, please read and understand this manual carefully before use,
and use this product after fully understanding
◎ Please keep this manual properly. When the user of the product changes,
please give this manual to the new user.
www.barton-tools.com