Advertisement
Quick Links
BALANCEFROM SAFETY GATE
MODEL NO: 291338, 292385, 291433, 43348, 433527, 433575, 575622
READ ALL INSTRUCTIONS BEFORE ASSEMBLY AND USE OF GATE.
KEEP INSTRUCTIONS FOR FUTURE USE.
BALANCEFROM LLC
740 Vintage Ave. Ontario, CA 91764
support@balancefrom.com
(310) 941-7878
Advertisement
Summary of Contents for BalanceFrom 291338
- Page 1 BALANCEFROM SAFETY GATE MODEL NO: 291338, 292385, 291433, 43348, 433527, 433575, 575622 READ ALL INSTRUCTIONS BEFORE ASSEMBLY AND USE OF GATE. KEEP INSTRUCTIONS FOR FUTURE USE. BALANCEFROM LLC 740 Vintage Ave. Ontario, CA 91764 support@balancefrom.com (310) 941-7878...
-
Page 2: Assembly And Installation Instructions
• To prevent serious injury or death, securely install gate or enclosure and use according to manufacturer’s instructions. Never use with a child able to climb over or dislodge the gate or enclosure. • Never leave child unattended. • Contact BalanceFrom for questions and replacement parts. - Page 3 IN THE BOX A. Gate Frame (comes with all models) B. 4x Threaded Spindle Rods (comes with all models) C. 4.72” Extension D. 14.17” Extension Model 291385: 1x Model 43348: 1x Model 291433: 2x Model 433527: 1x Model 433527: 1x Model 433575: 1x Model 433575: 2x E. 28.35” Extension Model 575622: 1x F. Anchor (comes with extensions)
- Page 4 STEP 1 Rotate the adjustment bolts along the threading. Shrink the space between adjustment bolt and rubber foot. Adjustment bolt Rubber Foot STEP 2 Insert 4 spindle rods into the holes at 4 corners of the gate frame (or extensions).
- Page 5 STEP 3 Place the gate in the center of your doorway or opening. Make sure the gate is leveled. Check the position of the gate. If you are satisfied with the position, twist the four adjustment bolts until the mark line on the lock stick is about in parallel with the lock slot opening.
- Page 6 STEP 4 How to open? Pull back the latch and lift the gate at the same time. STEP 4 Adding extension(s)? Insert extension(s) into the gate or extension(s). Then follow insert spindle rods into extension(s). Put anchor at the connection of gate and extension.