Page 1
IF A PART IS MISSING OR DAMAGED ... The store where you purchased this item does not have parts. You will get the easiest service from Darda, A Division of Life-Like Products, LLC Tell us the part(s) needed and be sure to include your name and address printed clearly.
Page 2
Using Track Joiners Guides Slide the Track Joiner - with the raised edges facing down - half way into the channel on the underside of Track the track piece. Now slide the adjoining track piece Joiner over the open half of the joiner, so that it meets the first piece.
Page 3
FIGURE 1 STEP 1 • Attach (1) stacking bridge to the baseplate. • Using the built in track joiner on the stacking Curved Support bridge, attach (1) loop, facing as shown in Figure 1. Track • Add (1) curved support track to the other end of the loop using (1) track joiner.
Page 4
STEP 4 FIGURE 4 • Using the built-in track joiners on the baseplate, attach one 14" straight track to the open loop end and one 14" straight track to the open curved support track end, as shown in FIGURE 4. 14"...
Page 5
STEP 7 FIGURE 7 •Connect 2 halves of the set at the start-win box using 2 track joiners. See FIGURE 7. Cars Race This Way Start/Win Box Track Joiners STEP 8 Checkered Flag Get set, go! Press down the red button on the start-win box. A Red and Green Buttons "brake"...
Page 6
Remember Darda Track is flexible. • Darda track layouts can be set up on any flat surface. While it is not ideal, your track can be set up on carpet. We do recommend dusting off the track before use so that dust particles from the carpet do not jam the motor in your car. We do not recommend running the car itself on carpet.