Advertisement
Quick Links
INSTALLATION GUIDE
For 1.5mm cable
place the cable¹ into
the channel and
push it down so itʼs
completely flat.
¹NOTE: for polarity, ensure the
Active/Line conductor is aligned
with the red mark. This can be
achieved by nicking a small part
of the insulation off the cable
outer sheath.
For 2.5mm cable,
remove the insert in
the centre, place the
cable into the channel
and push it down so
itʼs completely flat.
Place the cover on top
of the main body and
press the pins firmly
into the guides.
OPTIONAL
Turn over for termination and unlocking guide
TPS 2C+E
flat cable
N E L
Advertisement
Summary of Contents for M-Elec Blind Snake
- Page 1 INSTALLATION GUIDE For 1.5mm cable place the cable¹ into the channel and push it down so itʼs TPS 2C+E flat cable completely flat. ¹NOTE: for polarity, ensure the Active/Line conductor is aligned with the red mark. This can be achieved by nicking a small part of the insulation off the cable outer sheath. N E L For 2.5mm cable, remove the insert in the centre, place the cable into the channel and push it down so itʼs completely flat. Place the cover on top of the main body and press the pins firmly into the guides. OPTIONAL Turn over for termination and unlocking guide...
- Page 2 • Warranty is void if products have been altered, opened/modified in any way that is outside the bounds of normal electrical work. • To make a claim on any of M-Elec’s products, you must do so within 14 days from the day of receipt (from place of purchase) Slide the cover ...