Advertisement
Quick Links
P/N 126905-01 Rev. B 11/2016
P126905-01
WARNING:
FIRE OR EXPLOSION HAZARD
f i r e - p a r t s . c o m
Failure to follow safety warnings exactly could result in serious injury, death, or property damage.
— Installation and service must be performed by a qualified installer, service agency, or the gas
supplier.
WARNING: Improper installation, adjustment, alteration, service, or maintenance can cause injury or
property damage. Refer to this manual for correct installation and operational procedures. For assistance
or additional information consult a qualified installer, service agency, or the gas supplier.
The GA9050A-1 Series Manual On/Off Safety Valve/Pilot kit contains the following:
• Piezo Ignitor
• Manual Valve
• Pilot Burner (with natural gas orifice)
• Piezo Ignitor Electrode
• Steel Shroud - Pilot Kit
• Pilot Kit Incidentals
• Control Dial Instructions
• Brass 3/8 FLR x 3/8 MPT Elbow
• 18" Propane/LP Brass Orifice
INSTALLATION INSTRUCTIONS
MANUAL ON/OFF SAFETY VALVE/PILOT KIT
MODEL GA9050A-1 (F0235)
For All Single, Dual and Triple Burner Natural
and Propane/LP Gas Logs
For more information, visit IHP.US.com
097159-04
• 24" Propane/LP Brass Orifice
901068-02
• 30" Propane/LP Brass Orifice
901069-03
• Propane/LP Brass Air Mixer
901072-01
• Propane/LP Pilot Burner Orifice
901139-01
• Screw 1/4" #8 "B" pt (4 ea.)
901152-01
• Pilot Valve Control Dial
901042-01
• Pilot Valve Dial Extension 3"
14264
• Propane Conversion Decal
901065-02
Save this manual for future reference.
901065-03
901065-04
901066-02
901070-01
901075-01
901079-01
901080-01
901691-01
Advertisement
Summary of Contents for IHP GA9050A-1
- Page 1 Refer to this manual for correct installation and operational procedures. For assistance or additional information consult a qualified installer, service agency, or the gas supplier. The GA9050A-1 Series Manual On/Off Safety Valve/Pilot kit contains the following: • Piezo Ignitor 097159-04 •...
- Page 2 *Add 6" if safety valve/pilot is used **At depth indicated BURNER ORIFICE NATURAL PROPANE/LP LOG SIZE NUM. CLR. NUM. CLR. 18SR/DR 0.120 Blue 0.073 24SR/DR/BFLT18 0.129 Green 0.086 Orange 30DR/BFLT24 0.1405 Yellow 0.089 Black Figure 1 - Technical Information Charts 126905-01_B IHP.US.com...
-
Page 3: Installation
This keeps them from going into log set WARNING: Never connect natural gas appliance controls. If sediment trap is not installed or is installed wrong, log set may not run properly. to private (non-utility) gas wells. This gas is com- monly known as wellhead gas. 126905-01_B IHP.US.com... - Page 4 Bubbles forming show a leak. 5. Correct all leaks at once. Figure 6 - Checking Gas Joints 6. Reconnect log set and equipment shutoff valve to gas supply. (Propane/LP Gas Only) Check reconnected fittings for leaks. 126905-01_B IHP.US.com...
- Page 5 INSTALLATION Continued GA9050A-1 SERIES ON/OFF SAFETY VALVE/PILOT KIT ASSEMBLY Gas Connector Tube Natural Gas Installation 1. Thread the gas control valve onto the burner inlet fitting (see Figure 7). Use thread sealant on the male threads of the burner Gas Inlet inlet fitting.
- Page 6 The proper pilot flow will result in a strong blue flame between 1/2" and 1" long. Injector for Injector for Natural Gas Propane/LP Pilot Flow Adjustment NATURAL GAS Screw FITTING PROPANE/LP GAS FITTING Figure 12 - Burner Inlet Fittings with Injectors Figure 14 - Pilot Flow Adjustment Screw 126905-01_B IHP.US.com...
-
Page 7: Operating Appliance
OPERATING APPLIANCE Ignitor OPERATING INSTRUCTIONS Control Knob FOR GA9050A-1 SERIES 1. STOP! Read the safety information, in the owner’s manual in- Pilot cluded with your hearth kit. 2. Make sure equipment shutoff valve is fully open. 3. Press in and turn control knob clockwise to the OFF posi- tion. - Page 8 f i r e - p a r t s . c o m P126905-01 Innovative Hearth Products reserves the right to make changes at any time, without notice, in design, materials, specifications, prices and also to discontinue colors, styles and products. Consult your local distributor for fireplace code information.