Page 1
USER’S MANUAL FCC COMPLIANCE STATEMENTS This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, there is no guarantee that interference will not occur in a particular installation.
Page 2
On one end, a special universal connector plugs into the back of your Kanguru Device, and on the other end, a standard USB2, Firewire, Cardbus/PCMCIA or Parallel connection.
USB cable you have by examining the back of the universal connector. You will either find a 105, 305 or 307 label. The drivers for the 105 and 305 cables are in the Kanguru USB Cables folder and the 307 drivers are in the Kanguru USB 307 Cables folder.
Page 4
Note: The CD icon will only appear on your desktop when the CD is inserted into the drive. You will not see a CDRW drive icon on your desktop if there isn’t a CD present. FIREWIRE Cables: • Windows 98 SE/2000/ME/XP/Mac 8.6 and above Kanguru FireWire cables can connect to any of the Kanguru Multi interface products: Kanguru Portable 2.5”...
Page 5
Note: The CD icon will only appear on your desktop when the CD is inserted into the drive. You will not see a CDRW drive icon on your desktop if there isn’t a CD present. Cardbus/PCMCIA Cables: There are two modes for this cable: Cardbus and PCMCIA. Near the rear of the card, just before the cable, you will find a micro switch.
Note: The CD icon will only appear on your desktop when the CD is inserted into the drive. You will not see a CDRW drive icon on your desktop if there isn’t a CD present. Parallel Cables: Make sure your printer port works.
3. Select “Search for the best driver for your device” and click Next 4. Select “Specify a Location” and click Browse. 5. Browse to the drivers cd and select the “Kanguru Parallel Cables” folder, and then select the Drivers folder.