Page 1
Operation Manual Auto Darkening Welding Helmet 63361, 63394, 63395 Illustration similar, may vary depending on model Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further developments, illustrations, functioning steps, and technical data can differ insignificantly.
Page 2
To allow for a smooth execution of your complaint or return, it is important to contact our customer service team before returning the goods. Returns Department WilTec Wildanger Technik GmbH Königsbenden 28 52249 Eschweiler E-mail: service@wiltec.info Tel: +49 2403 55592–0 Fax: +49 2403 55592–15 https://www.XPOtool.com Item 63361, 63394, 63395 Page 2 The Tool Experts 05 2022-1...
Page 3
• The recovery time can be adjusted with the delay control. Depending on the welder's needs, the recovery time can be set from 0.1 s to 0.8 s. https://www.XPOtool.com Item 63361, 63394, 63395 Page 3 The Tool Experts 05 2022-1...
Page 4
The helmet and the welding filter must be stored in a dry, well-ventilated place. Do not expose the helmet to direct sunlight. • The storage temperature is –20 ℃ to +70 ℃. • Make sure that the welding filter does not get dirty. https://www.XPOtool.com Item 63361, 63394, 63395 Page 4 The Tool Experts 05 2022-1...
Page 5
Important notice: The reprint or reproduction, even of excerpts, and any commercial use, even in part, of this instruction manual require the written permission of WilTec Wildanger Technik GmbH. https://www.XPOtool.com Item 63361, 63394, 63395 Page 5 The Tool Experts 05 2022-1...