Summary of Contents for Anvil LAR- 04
- Page 1 MODELS LAR- 04/06/08/10 LAR- 04/06/08/10 INSTRUCTIONS MANUAL High Performance Industrial Blender 23152.5 -Dezembro/2008...
- Page 2 SUMMARY 1. Introduction 1.1 Safety 1.2 Main Components 1.3 Technical Characteristcs 2. Installation and Pre Operation 2.1 Installation 2.2 Pre Operation 3. Operation 3.1 Starting 3.2 Feeding Procedures 3.3 Cleaning 4. General Safety Practices 4.1 Basic Operation Procedures 4.2 Safety Procedures and Notes Before Switching the Machine On 4.3 Routine Inspection 4.4 Operation 4.5 After Finishing the Work...
- Page 3 1. Introduction Table - 02 Safety Problems Causes Solutions The High Performance Industrial Blenders are machines simple to use and to * Lack of power . * Check if machine is * The machine does not clean. However for your safety read the following instructions in order to avoid plugged in and if there switch On.
-
Page 4: Installation And Pre Operation
1.3 Technical Characteristics 4.4 Operation Table - 01 4.4.1 Advice Technical Data LAR-04 LAR-06 LAR-08 LAR-10 Be sure your hair is not loose in order to avoid getting caught by turning parts Units which could lead to a serious accident. Tie your hair well up and/or cover your head with Voltage 110/220(*) 110/220(*) -
Page 5: Operation
Before using the machine all parts that get in contact with food must be washed with running water and neutral soap. To clean your Blender read item 3.3 Cleaning on this 4.2 Safety Procedures and Notes Before Switching Machine ON Manual (pag.4). -
Page 6: General Safety Practices
4. General Safety Practices 3.3 Cleaning The following safety instructions are addressed to both the operator of the IMPORTANT machine as well as the person in charge of maintenance. The machine has to be Never do cleaning with the machine plugged in. Always unplug the machine delivered to the operator in perfect conditions of use by the Distributor to the user.