Advertisement
Quick Links
uniquegardendecor.
com (866) 382-8600
NOTE: Component photos are not to scale
300 pump (1)
Approx. 12" length of ½" black non-kink tubing (1)
Approx. 2" length of 5/8" clear vinyl tubing (1)
# 10 compression stopper (1)
4mm Allen wrench (1)
Wedges (4)
Hose clamps (3)
Note – Hose clamps may be used as flow restrictor
FT- 192 Caterina Fountain
COMPONENTS AND PARTS LIST
FT-192A
5.25" x 11" H
10 Lbs
FT-192B
18.25" x 5" H
34 Lbs
FT-192C
10" x 14" H
29 Lbs
FT-192F
16" x 24" H
209 Lbs
Pump Kit Parts List
(6 pieces)
FT-192D
4.75" x 1.75" x 3.75" H
2 Lbs
FT-192E
35.25" x 8" H
162 Lbs
Tools you will need
Level
4mm Allen wrench (included)
Revised May 24, 2012
This fountain
Fountain holds
uses cover
approximately 5
FTNCOV-LG
gallons of water
Advertisement
Summary of Contents for YARDART Caterina
- Page 1 FT- 192 Caterina Fountain (6 pieces) Revised May 24, 2012 COMPONENTS AND PARTS LIST uniquegardendecor. com (866) 382-8600 FT-192A 5.25” x 11” H 10 Lbs FT-192B 18.25” x 5” H 34 Lbs FT-192C 10” x 14” H 29 Lbs FT-192D 4.75”...
- Page 2 FT- 192 Caterina Fountain (6 pieces) Revised May 24, 2012 ASSEMBLY INSTRUCTIONS 1. Make sure you are assembling your fountain on a level surface. 2. This fountain will need to be installed on a surface capable of holding a minimum of 489 pounds in approximately a 1.75 square foot area.