IC Realtime ClearView NVR 34/34E Installation Manual

Thanks for choosing ClearView - the clear choice in video surveillance!
Register Your New NVR Online
Why register? Registering your product confers the following benefits:
•
FREE DDNS so your NVR will stay connected
•
Ensures product warranty – REGISTRATION IS REQUIRED for product repairs
•
New Software updates & and feature notification
•
Knowledge base and video tutorials
Go to http://register.ClearViewcctv.com
column. Filling in the form will create a MyClearView login, and you will be asked to register your NVR.
NVR INSTALLATION
Place the NVR and monitor within reach of CAT 5 camera cables and a wall plug AC power source (a
battery backup UPS is recommended). If you are attaching a monitor using the HDMI output, locate the
unit so that is within reach of the HDMI input on your TV or AV receiver.
At the NVR, attach the USB mouse and your VGA monitor & power supply to AC power. On the NVR34E &
NVR38E models there are two power supplies in the accessory box. One will power the NVR, and the other
will power the NVR's internal Power Over Ethernet (or POE) switch. Attach the NVR power supply, and the
POE camera power supply, to the NVR. Each are marked and have different connectors to prevent connection
mistakes.
NOTE:
On models NVR34 & NVR38 a separate POE power switch will be required to power the cameras or you will
need to run power directly to your cameras via the 12VDC power input.
and enter your information under the PRODUCT REGISTRATION
NVR 34/34E & 38/38E
INSTALLATION GUIDE