WAC Straight Edge LS-LED08 Installation Instructions

INSTALLATION INSTRUCTION
Straight Edge® LED Strip Light for Task and Cove
LS-LED
SAFETY INSTRUCTION
• Read all instructions before installing.
• Alway
•
• System is intended for installation in accordance with National Electric Code and local regulations.
• Consult with local inspector to assure compliance.
• Keep away from combustible materials such as plastic or paper products.
• Do not operate with missing or damaged parts.
PRODUCT INCLUDES
•
(1) Led Light Strip
•
(2) Flat Mounting Clips SL-C1
•
(2) Fixed Angle Mounting clips SL-C2
•
(1) "I" Connector
•
(2) Mounting screws
INSTALLATION AND WIRING
MOUNTING CLIPS
Flat (SL-C1), Fixed Angle (SL-C2), and Adjustable Angle (SL-C3-SN) (Sold Separately)
1. Choose the proper mounting clip needed for install
2.
TAPE
Double Sided (TAPE-36) and Magnetic (MAG-TAPE-36) (Sold Separately)
1. Chose Tape Depending on Sur
2.
3. Cut tape to a size appropriate for its use
4.
5.
Wrinkles in the tape will result in an uneven installation.
6. Peel backing aw
CONNECT POWER
Transformers needed (sold separately):
EN-2460-P-AR-S
60W plug in (120V)
EN-24100-P-AR-S
96W plug in (120V)
60W remote (120V) EN-2460-RB2-S
EN-24100-RB2-S
96W remote (120V)
96W remote (277V) EN-24100-277-R (Requires a SL-EXT-144
extension cable. order separately)
CONNECTING MULTIPLE FIXTURES
End to End Connection (I-connector included):
WAC Lighting
www.waclighting.com
Phone (800) 526.2588 • Fax (800) 526.2585
WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. J U N E , 2022
ician.
e of all oils, grease, dust, etc... to ensure proper bonding
y wrinkles.
Headquarters/Eastern Distribution Center
44 Harbor Park Drive • Port Washington, NY 11050
Phone (516) 515.5000 • Fax (516) 515.5050
Western Distribution Center
1750 Archibald Ave • Ontario, CA 91761
Phone (800) 526.2588 • Fax (800) 526.2585
1