6COM 6C-400A Manual

Gigabit Ethernet
Gigabit Gigabit Gigabit Ethernet Ethernet Ethernet Converter
1 1 1 1 . . . . Overview Overview
Overview Overview
This series converters are designed to meet the massive needs for Gigabit network deployment and able
to extend a copper based Gigabit network via fiber cable to a maximum distance up to 80KM.
This series converters are fully compliant with IEEE802.3z & 802.3ab standards. It can be installed into a
Standard Converter Chassis. The installation & operation procedures are simple & straightforward.
Operation status can be locally monitored through a set of Diagnostic LED located in the front panel.
Features
1000Base-T to 1000BASE-SX/LX Converter
Standard : IEEE 802.3z & 802.3ab
Interface: 1 x RJ-45 connector
1 x SFP Slot
MDI/MDIX Auto-Crossover supported
LED: Power , DUP,FP-LINK,RX,1000,TX
Plug-and-Play installation
Support Link Alarm
Support Jumbo Frame (64-9216 Byte)
Support Voltage Monitor
2 2 2 2 . . . . Installation Installation Installation
Installation
• Attach fiber cable from the SFP transceiver installed in the converter to fiber network. The fiber
connections must be matched – transmit socket to receive socket.
• Attach a UTP cable from the 1000BASE-T network to the RJ-45 port on the converter.
• Connect the power adapter to the converter and check that the Power LED lights up. The TP-Link and RX LEDs
will light up when all the cable connections are satisfactory.
6COM TECHNOLOGY CO.,LTD
Tel:+86-755-82782669 Fax:+86-755-81487760
Web:www.6comgiga.com
E-mail: Sales@6comgiga.com
Converter Converter 1 1 1 1 Tx Tx
Converter Tx port Tx
port &1 SFP slot
port &1 port &1 SFP &1 SFP SFP slot slot slot
Page 1 of 3
JUL 28 / 2004
v1.2