Unicor UG-230 User Manual

USER MANUAL(UG - 230)
Diecasting Alloy
Human Detection System
Electric Shock Prevention System
Double Safety System Against Fire
Imaginary Code System to prevent
exposure secret code
High Quality Individual Lighting
Touchpad
Double Security System
UG-230 :Secret Code + Digital Touch Key (2W)
UG-230S :Secret Code + Smart Card (2W)
UNICOR HIGHTECH CO., LTD
To Open the Door From Outside (Secret Code)
The product set to double security mode from origianlly purchased.
Please refer "how to set double security mode" if you want to change
normal mode.
1. To touch [Numeric Keypad]
Touch the [Numeric Keypad]
2. To enter the secret code
Double security mode
Press [*] button after
The light comes on any 3 numeric
enter the secret code being
button, then just press them regardless
light on all the numeric keypad
in oreder
Normal mode
Success : "Biriri"
Fail
Press [*] button after enter the secret
code being light on all the numerickey pad
The secret code should enter after numeric lamp turns on,
Note
and if numerice lamp off during entering code, then
please touch [Touch Keypad] and enter secret code again.
After wrong codes are entered 3times in a the keypad will
become inactive for half a minute with a alram "Biriri Biriri Biriri"..
Caution for Safety
For safety precaution is to ensure the safety of the user
due to accident, property damage and prevent inconvenience.
Please should read before use it.
Warning
Do not disassemble or alter the lock.
Do not install where the distance over
5mm between the door and door
frame.
Please do not expose the secret code
and change the secret code in regularly.
Batteries should npt be exposed
directly to heat sources or flames, or
submerged in water, because they may
leak or explode, resulting in severe
damage. Please do not use damaged
batteries.
Do not press using sharp tools or press
numeric button excessively
Product Composition
Product composition may be subject to change depending on the installation environment.
UG230
Front Ass'y
CAUSION
As this is a keyless digital door lock, damage may occure to parts of
the dead lock system if it is not used according to the manual,
Users should be fully aware of the manual and how to operate this
product.
www.unicor.co.kr
To Open theDoor From Outside
(Smart Tag)
Touch registered the digital key or the smart tag at the touch plate or tag touch
point where on the front ass'y
Touch registered the dingital key or smart tag key on the teg
touch point affer that door open you may open
Success : "Biriri"
If the smart tag have problem with automatic recognition
Fail : "Biribiri"
on the touch plate, then please touch again after Touch Keypad
Note
To Open/Close the Door From Inside
Open the door by Electronic
: "Biribiri"
Press [Open/Close] button to open
being deadbolt locked
Open the door by Mechanical
Turn manual knob
to open being deadbolt locked
Please make sure the batteries are inserted
correctly(+/-) as indicated in the battery
component. Otherwise, it ay cause a leaks
or explosions.
Please do not mix old with new batteries or
use different types.
Always use new alkaline batteries.
Do not clean the product with flammable
materials such as alcohol, benzene or
thinners. Such materials may damage the
surface or cause a fire.
Pleae change all the batteries within 7 days
after hear first melody to change battery.
Back Ass'y
UG230S
Front Ass'y
Mounting Plate
Strike & Strike Spacer
User Manual/ Product Warranty / Installation
Template / AA LR6 Battery 4pcs / Screw
Success : "Biriri"
Fail
Close the door by Electronic
"Biririk"
"Biriririk"
Press [Open/Close] button
to lock the door in manual mode
after closed the door
Close the door by Mechanical
Turn manual knob
to close after the door closed
Specification(Front Ass'y)
Emergency power
supply Terminal
Specification(Back Ass'y)
Sensor Ratch
Deadbolt
Manual Knob
For the Emergency use : if Open/Close
button is not working, then just turn to
open by finger
To Open the Battery Cover
Press slightly battery cover and push to the direction of the arrow to open.
Register Secret Code
The secret code can register between 3 to 20 digits and 1 secret code can use
1. Press [Register] Button 2. Enter a New Secret Code 3. Finish to Register
"Bibi"
: "Biribiri"
Press [Register]
button shortly afte
open the battery cover.
please use secret code over 6 digits to prevent exposuresecret code
(Can be used the numeric 0 ~ 9 only).
Do not exposed secret code to any 3rd person. For this, you
CAUSION
should change secret code regularly.
Automatically delete existing secret code after registering a
new secret code
You should check what a new secret code is register
properly or not before close the door.
To Register Digital Key / Smart Tag
It will be automaticall deleted all existing digital keys or smart tags if register
new one, therefore you should register in once time up to 50pcs each of them
1. Press [Register] Button
"Bibi"
Press [Register] button shortly after
open the battery cover.
3. Finish to Register
"Biriri"
Press [Register] button to set on
It can be registered several smart tags, you should touch
continuously smart tag within 7second after starting to register
Note
first digital smart tag, and it will set up automatically after 7 seconds.
To confirm the register properly or not with the door open.
Numeric Keypad
Touch
Point
Open/Close Button
Auto/Manual
Switch
Volume Switch
Register Button
Double Lock Button
"Biriri"
Enter a new secret Press [Register]
code(3~20 digits) button to set on
2. Touch Digital Key or Smart Tag
Touch the digital key or smart tag at the
touch plate or touch point