Advertisement
Quick Links
CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when not in use.
Remove wooden furniture from standing water. Dust regularly with small brush or vacuum
Spills should be taken care of immediately before they harden or
stain with a slightly dampened sponge.
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* This item may require periodic tightening
Part List and Hardware List
PIECE
DESCRIPTION
Right Frame
1
Left Frame
2
Back Frame
3
Seat Frame
4
Front Frame
5
Box Front Frame
6
7
Box Right Side Frame
Box Left Side Frame
8
9
Box Top Frame
10
Seat Cushion
A
Gaslift
B
Allen Bolt(M6x15 mm)
C
Allen Bolt(M6x30 mm)
D
Allen Bolt(M6x40 mm)
E
Allen Bolt(M6x50 mm)
F
Flat Washer
G
Allen Key
H
Washer (M6 X 5 mm)
I
Washer (M6 X 10 mm)
J
Nut
K
Key
PICTURE QUANTITY
1X
1X
1X
1X
1X
1X
1X
1X
1X
2X
1X
4X
12X
9X
1X
26X
2X
1X
1X
1X
1X
Weight Capacity : 275 Ibs (single seat)
Warning : Do not stand on bench
Warning : Do not over torque bolts/screws
Model# PAT7710
Product Dimensions:
54.72"x23.62"x32.68"H
550 Ibs (two person seat)
1-4
Advertisement
Related Manuals for Safavieh Outdoor Viora PAT7710
Summary of Contents for Safavieh Outdoor Viora PAT7710
- Page 1 CARE AND MAINTENANCE Store outdoor furniture indoors or cover well when not in use. Remove wooden furniture from standing water. Dust regularly with small brush or vacuum Spills should be taken care of immediately before they harden or stain with a slightly dampened sponge. NOTICE Weight Capacity : 275 Ibs (single seat) * Please make sure that you have all parts indicated before you begin assembly of this item...
- Page 2 STEP 2: Connect The Part from STEP 1 and Left Frame (2), tighten Bolt STEP 1: Connect Seat Frame (4) and Front Frame (5), tighten Bolt (D), Flat Washer (F) with Allen Key (G). (D),(C), Flat Washer (F) with Allen key (G). STEP 3: Connect The Part from STEP 2 and Right Frame (1), tighten Bolt STEP 4: Connect The Part from STEP 3 and Back Frame (3) (D),(C), Flat Washer (F) with Allen Key (G).
- Page 3 STEP 5: Connect The Part from STEP 4, tighten Bolt (D),(C), Flat Washer (F) STEP 6: Connect The Part from STEP 5 and Box Right Side Frame (7)& Box with Allen Key (G). Left Side Frame (8), tighten Bolt (C), Flat Washer (F) with Allen Key (G). STEP 7: Connect The Part from STEP 6 and Front Box Frame (6), tighten STEP 8: Connect The Part from STEP 7 and Box Top Frame (9).
- Page 4 STEP 9: Connect The Part from STEP 8, tighten Bolt (B), Flat Washer (F), STEP 10: Connect The Part from STEP 9 and Gaslift (A), tighten Bolt (C), Flat with Allen Key (G). Washer (F),Washer (H),(I) and Nut (J) with Allen Key (G), Key (K). STEP 11: Put Seat Cushion (12) on Chair.