Summary of Contents for Jam D1200
- Page 1 Professional Power Amplifier Owner's Manual for model: D1200 / D3600 / D4600 / D5400...
- Page 2 SAFETY INSTRUCTIONS AND ADVICE Warning! Please read this user manual fully before using this product, and make sure you follow all the instructions, and heed all warnings. Unpack the carton and check the contents to ensure all parts suitable current rating for the equipment. Failure to do so may are present and undamaged.
-
Page 3: Front Panel Controls And Functions
1. Introduction Thank you for your purchase of thos D-Series Power Amplifier. This series of amplifiers incorporate established technological expertise, and offer high reliability, rock-solid stability, and superb acoustic characteristics—all in a trim, 1U-sized package. Features: Modular design, each channel is fully separate and without any interference to other channels. Each module is individually fused and has •... -
Page 4: System Connection
1-3 System Connection In standard operating mode, you can connect 2 audio sources, usually one for left channel and the other to for right channel. You should connect the audio source to inputs A and B, The corresponding outputs should be connected to outputs A and B. Be sure to use a minimum impedance of 2 ohms per channel. -
Page 5: Start-Up Procedure
2. Operating Instructions 2-3 Troubleshooting: 2-1 Start-up procedure. Indicator(s) Possible cause 1. Check all inputs and outputs are connected correctly as per 1. No power – check there is power, the above instructions, paying particular attention to the bi- and the power light is on. amp configuration offered on the amplifier. -
Page 6: General Specifications
3. General Specifications Model D1200 D3600 D4600 D5400 Number of channels Output Power (All Channels driven output power, THD=1%) 8Ω 350W×2 800W×2 1100W×2 1400W×2 4Ω 500W×2 1500W×2 2100W×2 2500W×2 2Ω 600W×2 1800W×2 2300W×2 2700W×2 Frequency Response (@8Ω) 20Hz-20kHz, ±0.3dB Slew Rate...