VT-R-01, VT-R-03 heating constant temperature baths Operating manual TABLE OF CONTENTS Introduction....................... 3 Intended use ....................3 Appearance and parts names ................3 Environmental Conditions ................4 Safety Recommendations ................4 Using The Heating constant temperature Baths ............5 Preparation ....................5...
VT-R-01, VT-R-03 heating constant temperature baths Operating manual This manual provides the information needed to operate heating constant temperature baths VT-R-01 and VT-R-03. INTRODUCTION Intended use Heating constant temperature baths are intended for standard test method for vapor pressure of petroleum products (Reid Method) according to ASTM D323 and ASTM D1267.
VT-R-01, VT-R-03 heating constant temperature baths Operating manual The operating principle of the baths is based on supporting a preset constant tempera- ture of flowing thermal fluid in the bath tank and providing a good temperature uniformity of the operating bath.
VT-R-01, VT-R-03 heating constant temperature baths Operating manual USING THE HEATING CONSTANT TEMPERATURE BATHS Before using bath circulator, carefully read the operating manual. Preparation Carefully select a spot for installing in- strument with free air access for the circulator ventilation.