YouLumi YL-IRP-001 Instructional Manual

RED LIGHT THERAPY
Instructional Manual
RED-LIGHT-THERAPY FOR HUMAN
Thank you for purchasing our red light therapy, we hope you can get benefits from our device .
SAY HELLO TO YOUR RED LIGHT
Before starting your first session, please make sure to read this manual as it may explain important operating
procedures. The red light devices use red 660nm and Infrared 850nm leds which is chosen to give the ideal
wavelengths found in the scientific research of the last three decades .
660nm of red light. This light can be seen by the eyes and targets skin cells.
850nm of near infrared light. This light cannot be seen by the eyes and targets deep tissue.
SPECIFICATION
Product Name YL-IRP-001
Power
500W
Actual Power 150W
Input Voltage AC110-240V
100pcs 3W(default) / 5W 200pcs 3W(default) / 5W
LED QTY
Bean Angle 30° or customized 30° or customized
Irradiance >110 mW/cm² @6inch >120 mW/cm² @6inch
Spectrum 850:660 1:1 or customize 850:660 1:1 or customize
Material
lron
265*220*70mm 480*220*70mm
Dimensions(mm)
10.43"x8.66"x2.76" 18.90"x8.66"x2.76"
Lifespan
50,000
Net Weight (kg)
2.50kg
YL-IRP-002 YL-IRP-003
1000W 1500W
450W
300W
AC110-240V AC110-240V
300pcs 3W(default) / 5W 400pcs 3W(default) / 5W
30° or customized 30° or customized
>130 mW/cm² @6inch >135 mW/cm² @6inch
850:660 1:1 or customize 850:660 1:1 or customize
lron lron
920*220*70mm
690*220*70mm
36.22"x8.66"x2.76"
27.17"x8.66"x2.76"
50,000 50,000
5.10kg 6.90kg
-1-
THIS PACKAGE INCLUDES
● 1* Red light device
● 1* door hook
TIME CONTROLLER EXPLANATION
Increase Button
Set Button
Decrease Button
OPERATION GUIDE
1. Turn on the power switch, the time controller is on. Long press the "set" button, the
and press the increase/decrease button to select the type of timing unit: 0,1,2; Our products
SV is "1",that means the timing unit is minute.
Code
P0
YL-IRP-004
2000W
600W
Our products the timing unit is minute, so PV is "P0" / "SV" is "1"
After P0 is set, wait for 3 seconds. The device automatically saves the Settings and rolls back display.
AC110-240V
2. After setting the timing unit, long press the set button, the PV is "P0", then press the set again,
the PV change to "P1", and press the increase / decrease button to select the type of operating
mode: 0,1,2,3,4,5; Our products SV is "2", that means timed off after timing on.
lron
50,000
8.90kg
1* Power cable 1* eye protection
2* rope clip hanger 1* User manual
Item Vlue Introduction
0 Second
Timing unit Minute
1
2 Hour
The PV setting is "P0"
0 means the timing unit is second
1 means the timing unit is minute
SV setting is timing unit
0 means the timing unit is hour
The PV setting is "P1"
SV setting is "2"
-2-
PV time1
SV time2
Restart Button
PV is "P0",
Remark
Time range: 0-999s
Time range: 0-999min
Time range: 0-999h