Advertisement
Quick Links
iPro 10E/20E/40E LED
Outdoor Gobo Projector
Instruction/User Manual and Specifications
Package Contents
Projector, optical lens and cable with standard 110 Volt plug.
Description
iPro "E" LED projectors are rated IP-65 for outdoor use. To project
an image, a high resolution glass, metal or plastic/film gobo is
required. To order a gobo, e-mail the artwork of the desired image
to Info@UseLight.com. Line-art or vector files are acceptable,
as are pixel files (e.g. .JPEG, .PNG, .TIFF, .PDF, etc.) 300 dpi or
better.
Safety Information
•
For indoor or outdoor use.
•
Prevent direct eye exposure to the light source as it may lead
to injury or blindness.
•
Please use caution when handling or touching the unit during
and after operation, as it may heat up.
•
Only use power sources that comply with local electrical and
building codes and have proper grounding.
Gobo Specifications
•
Outer diameter (OD) - 37.5 mm
•
Inner or image diameter (ID) - 25 mm
•
Gobo thickness: Up to 3 mm
1
Advertisement
Summary of Contents for Image Projection iPro E
- Page 1 iPro 10E/20E/40E LED Outdoor Gobo Projector Instruction/User Manual and Specifications Package Contents Projector, optical lens and cable with standard 110 Volt plug. Description iPro “E” LED projectors are rated IP-65 for outdoor use. To project an image, a high resolution glass, metal or plastic/film gobo is required.
- Page 2 Projector Specifications Gobo Installation iPro-10E iPro-20E iPro-40E Model: 110 to 277 V* 110 to 277 V* 110 to 277 V* Voltage: 10 W 20 W 40 W Lamp (LED) 50/60 Hz 50/60 Hz 50/60 Hz Rated Frequency: 30 - 40,000 Hrs 30 - 40,000 Hrs 30 - 40,000 Hrs LED Life Expectancy:...
- Page 3 Adjusting the Image Focus Once the gobo is succesfully installed and the front plate cover is reattached, rotate the lens clockwise or counter-clockwise until the image is in focus. Once the image is in focus, turn the lock ring clockwise until the rubber gasket is slightly compressed.