Bartuf Flexi-News Series Assembly Instructions

Assembly Instructions
Flexi-News™ cross category
Flexi News™
cross cat.
twin
B001731
Flexi News™
cross cat.
tall twin
B001733
Flexi News™
cross cat.
quad
B001728
Tel: 0113 244 5524 Fax: 0113 244 6664 email: sales@bartuf.com web: www.bartuf.com
All dimensions are approximate and may be subject to change.
All drawings and designs are protected by design right and copyright©
Patents GB 2293538B.GB 2317328 US 6,112,912
1.
x1
x1
x1
A
x1/2
First, take base (A) and ensure brakes are
x4/8
applied to the two castors that have them.
Braked castors are at opposite corners of
base.
x1/2
4.
x1/2
x1/2
x1/2
D
x8
Next place the insert panel (D) onto the
base as shown.
2.
C
With the base locked in place, drop the RH
panel (C) into the base (A) as shown above.
5.
E
Take the first confectionery shelf (E) and locate
the slots on the sides onto the lowest set of metal
studs on the right hand panel of the existing display
and the insert panel (D).
3.
Fig. i
J
Next secure the RH panel (C) in place with
x4 thumb screws (J). Repeat steps 2 and
3 for the LH panel (B). Both LH and RH
panels should now be in place as in Fig. i
6.
E
PUSH
DOWN
E
Guide the slots on the sides of the shelf
onto the metal studs and push down until
the shelf 'snaps' into place.