Jescraft WA-4824F Operational Safety And Assembly Instructions

Models: ATC-5834PL-2R2S; *Base ATC cart with optional Jescraft Casters
Picture may differ from
actual product
READ THESE INSRUCTIONS CAREFULLY BEFORE USING THIS PRODUCT. KEEP THIS MANUAL HANDY FOR FUTURE REFERENCE.
A FRAME CART
Models: WA-4824F, WA-4824* / WA-6024F, WA-6024* - * denotes Base model cart
with with optional Jescraft Casters
READ THESE INSRUCTIONS CAREFULLY BEFORE USING THIS PRODUCT. KEEP THIS MANUAL HANDY FOR FUTURE REFERENCE.
READ BEFORE BEGINNING ASSEMBLY AND USE
FAILURE TO READ, UNDERSTAND AND FOLLOW ALL SAFETY RULES AND ASSEMBLY INSTRUCTIONS IN THIS
MANUAL BEFORE ASSEMBLING, INSTALLING, USING OR SERVICING OF THE PRODUCT IS A MISUSE OF THE
PRODUCT AND COULD RESULT IN SERIOUS INJURY OR DEATH. IF AFTER READING THE MANUAL YOU DO
NOT UNDERSTAND AN INSTRUCTION, ASK YOUR SUPERVISOR OR EMPLOYER FOR CLARIFICATION.
JESCRAFT IS NOT LIABLE FOR ANY INJURY OR PROPERTY DAMAGE THAT OCCURS AS A CONSEQUENCE OF
FAILING TO APPLY EITHER: a) THE INSTRUCTIONS IN THIS MANUAL; OR b) INFORMATION PROVIDED ON
LABELS AFFIXED TO THIS PRODUCT. NEITHER IS JESCRAFT RESPONSIBLE FOR ANY CONSEQUENTIAL
DAMAGES OR INJURYS SUSTAINED AS A RESULT OF FAILING TO EXERCISE SOUND JUDGMENT WHILE
ASSEMBLING, INSTALLING, USING OR MAINTAINING THIS PRODUCT.
METAL CONDUCTS ELECTRICITY:
Do not use this equipment where contact may be made with power lines or other live electrical circuits.
DO NOT OVERLOAD:
This Cart is designed to support a maximum load of 1,000 lbs. DO NOT exceed this maximum rated load.
OPERATION AND SAFETY
• Do not use this equipment if you are in poor health, taking medications,
drugs, or have been consuming alcohol, all of which may impair your
ability to work safely on this product.
• Always use this cart in compliance with local or national laws,
regulations, codes, and any other standards enforced in the location
where the product is used. This is the responsibility of the owner/user.
• Inspect product before each use. Do not use if damaged or if any
unusual noise or movement is observed. Check for missing parts.
• Examine thoroughly to make sure Cart is set up properly. If assembling
or tightening fasteners, tighten all fasteners to the torque
specified: Recommended Tightening Torque: 21 ft-lbs. Do not exceed
27 ft-lbs. Do not overtighten – overtightening can cause damage to the
unit. Do not replace or substitute bolts, nuts, or other hardware that is
of lesser quality than the hardware supplied by the manufacturer.
• All components must be complete, functioning properly and correctly
assembled. If a malfunction occurs, remove the product from service
and notify your supervisor and maintenance personnel about the issue.
• Any incomplete part, missing part, or ill-fitting part should be replaced
prior to use.
• Keep the product clean & dry. Lubricate moving parts. Proper use,
maintenance, and storage are essential for this product to function
properly.
• Use the right product for the job. Do not modify the Cart and do
not use the Cart for a purpose for which it was not intended.
• Do not exceed the maximum load capacity of 3,000 lbs.
OPERATIONAL SAFETY AND ASSEMBLY INSTRUCTIONS
• Always distribute objects on the Cart evenly, resting adequately on
upright supports and secured to prevent falling off. 4824 size models
have a maximum usable tray load of 8" per side. 6024 size models have
a maximum useable tray load of 5" per side. Uneven weight distribution
could cause Cart tipping.
• Be aware of dynamic loading. Suddenly dropping or bouncing a load on
the Cart may create, for a brief instant, an excess load, which may result
in damage to the product and/or personal injury.
• This Cart must be used on solid flat surfaces.
• This Cart must be used on a firm surface that is free of pits, debris, holes
or obstructions.
• Acids are corrosive and can seriously affect strength. Do not expose this
Cart to corrosive substances.
• Never move a Cart with a worker within.
• Do not use powered devices to propel this Cart. Use extra caution near
operating machinery.
• Do not modify this Cart or any of its components.
• Do not remove any labels from this Cart.
• Always use this product in accordance with the instructions in this manual
and consistent with any training relevant to machines, devices, materials,
etc. used in conjunction with this product.
985-0006 Rev 0