Advertisement
Quick Links
Copyright Notice :
www.acode.com
Copyright (c) 2017 by Acode System
No part of this manual may be reproduced, modified, published, uploaded, posted, and transmitted in any form or by
any means, except duplication of documentation by the purchaser for backup purpose, without Acode System's
permission.
Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of
their respective companies, and are used only for identification or explanation and to the owners' benefit, without
intent to infringe.
In no event shall Acode System be liable for incidental or consequential damages arising from use of this document
or the software and hardware described in this document.
This document is subject to change without prior notice.
Warning!
It will cause malfunction if the cash drawer trigger is operating with unspecified power supply unit or incorrect power
voltage. Do not exposure this unit in the rain or moisture environment to reduce the risk of fire or electric shock.
Content :
AT09PB Push Button / Manual
I.
Specifications – AT09PB
II.
Cash Drawer Trigger Installation AT09PB
III.
Operation AT09PB
AT09RS RS232 Interface
IV.
Specifications – AT09RS
V.
Cash Drawer Trigger Installation AT09RS
VI.
Functional Test
AT09PB / AT09RS Cash Drawer Trigger
Installation Guide / Setup Manual
Advertisement
Summary of Contents for acode AT09PB
- Page 1 In no event shall Acode System be liable for incidental or consequential damages arising from use of this document or the software and hardware described in this document.
- Page 2 Specifications – AT09PB Push Button / Manual Interface USB port power/drawer port Power Input USB Power : 5V 30 (standby) ~ 350mA (max) (Optional : External Power Supply 5V/0.5A) USB POWER Micro USB ADS-DRAWER RJ11 (drawer port), Default DRAWER PIN : 2 and 4 Support DRAWER PIN : 2 and 4 &...
- Page 3 For cash drawer using PIN 2 and 4 to open drawer, move jumper block to PIN 1 and 2. For cash drawer using PIN 4 and 5 to open drawer, move jumper block to PIN 2 and 3. ACODE SYSTEM tel 852.2896.1485 www.acode.com...
- Page 4 3) To unplug the cables from the cash drawer trigger, remove the four screws on the socket panel, then unplug the connectors from the sockets. 4) For mounting, hold the trigger and insert a M3 size screw into each of the two corresponding holes and tighten. ACODE SYSTEM tel 852.2896.1485 www.acode.com...
- Page 5 2) Plug your cash drawer’s RJ connector into the socket. 3) To unplug the cables from the cash drawer trigger, remove the two screws on the socket panel, then unplug the connectors from the sockets. ACODE SYSTEM tel 852.2896.1485 www.acode.com info.hk@hkacode.com...
- Page 6 Before you start, please make sure the cash drawer and cash drawer trigger are correctly installed. 1) Enter Command Prompt (cmd). 2) Type “type con>comX (your COM port number, eg. type con>com5). 3) Press Enter. 4) The cash drawer will open. ACODE SYSTEM tel 852.2896.1485 www.acode.com info.hk@hkacode.com...