3d cabin PS5 Instructions

PS5 Wall Mount Wall Bracket
Holder Stand For Play Station
5 Digital Corner Support
SKU : 3D PS5 DI WM2 4P
CONTENTS:
4 x Bracket (A,
B, C, D)
6 x Screws
6 x Wall Plugs
3DCabin
WWW.3DCABIN.CO.UK
INSTRUCTIONS:
1. Find a suitable location and check that there are no hazards in the chosen space, e.g. power
cables, water pipes or anything that should not be damaged.
2. Using the Drilling template overleaf mark the locations for the holes to be drilled for the bottom
brackets A and B
3. Using a pen or pencil mark through the mounting screw holes onto the surface you want to
mount to.
4. If mounting to a solid wall use a 5.5mm drill bit to make the necessary holes as marked.
5. Place a Red fixing raw plug in each hole.
6. Line up your bracket holes with the Red raw plugs in the wall and using the screws provided,
screw the bracket to the wall, DO NOT OVER TIGHTEN Diagrams overleaf to show orientation of
brackets
7. Place your device into the brackets A and B and ensure snug fit and attach C and D onto the top
of the console
8. Use a 5.5mm drill bit and Red raw plug's if necessary, again.
9. Your device is now ready to be plugged in!
10%
OFF FUTURE PURCHASES USE CODE
@3DCabin
equidistant , ENSURE it is firmly in place before marking the hole to drill.
WWW.3DCABIN.CO.UK
GB : Contains small Parts Keep away from Children.
DE : Enthält Kleinteile Von Kindern fernhalten.
FR : Contient de petites pièces Tenir hors de portée
des enfants.
IT: Contiene piccole parti Tenere lontano dalla portata
dei bambini.
ES: Contiene piezas pequeñas Mantener alejado de
los niños.
Please consult a qualified person when installing.
Instructions & Offers
Inside!
Manufactured By Jabtek Ltd, CT18 8DF
2020D10