Summary of Contents for 2B Warm PN1000G
- Page 1 INSTRUCTION MANUAL PANEL GLASS CONVECTION HEATER MODEL: PN1000 with WIFI & App Connectivity 2B Warm Panel Glass Convection Heater by : KPVE PTY LTD (PO Box 33, Sylvania NSW 2224) PH : 1300 2BWARM E : admin@kpve.com.au...
- Page 2 To get the most out of your new heater, please read through these instructions and the attached safety regulations before use. Please also save the instruction manual in case you need to remind yourself of the heater’s functions at a later date. Technical Specification Details PN1000G PN1500G PN2000G Voltage 220-240V...
- Page 3 13. Do not use this heater in the vicinity of showers, bath tubs, wash basins or a swimming pool etc. 14. Do not use the heater in the rooms containing explosive gas inflammable solvents, varnish or glue. 15. Keep the heater clean. Do not allow any objects to enter any ventilation or exhaust opening as this may cause electric shock, or fire or damage to the heater.
- Page 4 3. Touch screen control and remote control. 4. Timer from 1 to 24 hours to turn the convector heater on or off at the desired time. 5. Digital display with automatic room temperature display. 6. For wall mounting or free standing with tripod. Installation (While use on the floor as portable appliance) Please attach the feet on the heater’s housing, and fixing them with supplied ST4x12mm(8pcs) screws.
- Page 5 Display Temperature“+” button Temperature“-“ button Power button Mode button Timer button Receiver 8. Child clock button Power function Before you working the heater,your should turn on the switch in side. Press “ ” to set functions. The upper part of the display shows the room temperature The heater is working at low power heating conditions.
- Page 6 2.Select your country code, enter the cellphone number and tap “Get” to get a message containing verification on code. 3.Enter the verification on code in the message and tap“Login” to login the App. 4.Go to the App, tap “add device” at the bottom, as shown in the picture 1 5.
- Page 7 Pic 2 Pic 3 Pic 4 7.After the device is connected successfully,tap “Devices” at the bottom. The device name shows in the list in the picture 5. Tap it to enter the control panel of the smart socket. Remarks: When device is online, there will be a green dot at the front of the device icon; When the device is offline, the dot will be grey;...
- Page 8 8.“My profile” is where users could manage personal information. The key information is as follows see picture 6: a.Personal information:including account name and cellphone number b.Information of shared devices c.Message center d.Entry to submit feedback e.F.A.Q f.Phone binding: if you sign in with social network account, you could bind your phone number with your account g.About 9.Add sharing: As shown in the picture, users could type in a new member’s cellphone...