Before You Begin Please follow the instructions below before you begin using the high-performance NVR system. The following must be made available for installing the NVR 1. Network connection 2. Configuration of network cameras 3. Computer for configuring NVR 4. Preinstalled hard disks in NVR unit 5.
Package Contents Package Contents The box contains the following: NVR Introduction NVR System Diagram Hardware Connection Start Up & Shut Down NVR Network Video Recorder Ethernet Cable (Cat 5/Cat 6) Power Adapter Surveillance Hard Disk Drive (Optional) Product DVD Screw Pack...
NVR Introduction Package Contents NVR Introduction NVR System Diagram MX -1000 Series MX -2000 Series Hardware Connection Start Up & Shut Down Power Button* USB 3.0 x 2 Gigabit LAN LED Indicators: HDD** DVI -I Port USB 2.0 x 2 USB 2.0 x 2 Audio Input eSATA Port...
Page 5
NVR System Diagram Package Contents NVR Introduction NVR System Diagram Broadband Hardware Connection Router Start Up & Shut Down Network PoE Switch Megapixels IP Camera Internet Megapixels IP Camera...
Hardware Connection Package Contents NVR Introduction MX NVR Connection NVR System Diagram Connect the Ethernet cable, power adapter & HDMI cable (or DVI cable) to the NVR’s ports for the network PoE switch, power source & LED Monitor. Hardware Connection Start Up &...
Start Up & Shut Down Package Contents NVR Introduction To Switch on the MX NVR: NVR System Diagram 1. Connect the power adapter to the MX NVR and an electrical outlet. 2. Connect the LED monitor with an HDMI cable (or DVI cable) and the mouse to the NVR. Then press the Power button on the Hardware Connection NVR system.