Safety Features And Tips - GrillBlazer GrillGun User Manual

Safety Features and Tips

Built‐In Safety Design Considera ons
Check Valve

GrillGuns are equipped with a gas flow check valve to close and
prevent liquid propane from flowing into and through the Grill-
Gun either directly from a lted bo le or by liquid propane being
collected in the adaptor hose. To release (open) the check valve,
hold the GrillGun ver cally and disconnect the Gas Connector.
Squeeze the handle trigger or open and close the main valve (red
knob) to release the torch pressure. Reconnect the fuel source
again to the Gas Connector. The GrillGun will operate correctly
again.
Handle Trigger Lock

The Handle Trigger Lock is designed to keep you from inadvert-
ently pulling the Handle Trigger. The Handle Trigger (Bypass
Valve) bypasses the Gas Valve to give you the ability to instantly
provide full fuel force to the GrillGun, regardless of the posi on
of the Gas Valve knob. The Handle Trigger Lock is designed to
prevent accidental ac va on of the Handle Trigger Bypass Valve.
Opera onal Safety Warnings and Instruc ons

Always disconnect the propane bo les from the GrillGun when
not in use, and store separately.

Always teach someone how to properly operate the GrillGun be-
fore allowing them to handle it. Only allow someone who is ca-
pable of properly handling, understanding, and respec ng the
output power of the GrillGun to handle and operate it.

The GrillGun has the poten al of burning something up to 5 feet
away from the end of the barrel. Never point it at something
that you don't intend to burn.

Check Valve: Always operate the GrillGun with the propane tank
upright, where only propane gas will enter into the GrillGun. Do
not invert or otherwise allow liquid propane from the bo le or
16