GrillBlazer GrillGun User Manual page 11


When using the GrillGun inside, only use for hea ng materials in a large
area with enough ven la on to avoid the build up of smoke, fumes, and
gases. If the air is not clear and free of smoke, fumes, and gases, stop
using the torch and move the work outside or improve the ven la on.

Propane fumes may collect in an unven lated or enclosed area causing
an explosive atmosphere or one in which you cannot safely breathe.

Never use the torch on materials, coa ngs, solvents, or chemicals which
release toxic fumes when heated, or on poisonous plants such as poison
ivy or poison oak.

Avoid breathing smoke or fumes from the burning material.

Keep your head out of the smoke or fumes.

If the smoke or fumes make you uncomfortable, stop using the torch on
the material.

In some loca ons you may not be permi ed to burn outdoors without a
permit. Contact your local authori es and fire department about state
and local codes or permit requirements before using torch to burn.
WARNINGS: Proper handling, storage, transporta on and usage
of propane fuel tanks, cylinders and bo les

COMPLETELY EMPTY 1-lb disposable propane bo le using your GrillGun
before removing and discarding in household trash.

NEVER store or place a large or bulk propane cylinder (tank) indoors or
in an enclosed area such as a basement, garage, shed, or tent.

NEVER store or place a propane cylinder or 1-lb bo les in an area of
excessive heat (120 degrees or higher) or near a stove, fireplace, or oth-
er heat source. The heat builds up pressure inside the cylinder, which
may cause the cylinder's pressure relief valve to release propane. Flash
fires or explosions can result from exposing cylinders to heat.

NEVER store or place a spare cylinder under or near a barbecue grill in a
manner where it will be exposed to the heat of the opera ng grill.

DO NOT smoke or have any igni on sources such as flames or spark-
producing electrical tools in the area while handling or transpor ng cyl-
inders.

ALWAYS transport and store a cylinder in a secure and upright posi on
so it will not fall, shi , or roll.

ALWAYS close the cylinder valve and, if required, seal with a plug, even
if the cylinder is empty.

NEVER keep a filled cylinder inside a hot vehicle or transport it inside a
9