SHENZHEN GUIYUAN INDUSTRY DEVELOPMENT S1U-DC06-ANT2 Quick Start Manual

RF Wireless Remote Control Radio Controller / Transmitter & Receiver
Package Include:
1 x Receiver: S1U-DC06-ANT2 / S1U-DC09-ANT2 / S1U-DC12-ANT2 / S1U-DC24-ANT2 (1 Channel / Three Control Modes)
1 x Transmitter: CB-2L
1 x User manual
Feature:
Wireless control, easy to install
Control Lights, Motors, Fans, electrically operated Doors / Locks / Windows / Blinds / Cars or Other Appliances with voltage AC110~240V or
DC0~28V.
You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass
through walls, floors and doors.
With characteristics of reverse power protection and over current protection
Audible / visual indication
Use microcontroller model of EM78P156, an 8-bit microprocessor designed and developed with low-power and high-speed CMOS technology.
More reliable than fixed code; the transmitter use EV1527 Learning code, which is up to 1 million codes, reducing code collision and unauthorized
code scanning possibilities.
One / several transmitters can control one / several receivers simultaneously.
Two or more transmitter & receivers set can be used in the same place.
Transmitting Frequency: 315MHz / 433MHz
Working distance of transmitter and receiver with external extend antenna: 2000M / 6000ft (theoretically)
Receiver:
Model No.: S1U-DC06-ANT2 / S1U-DC12-ANT2 / S1U-DC09-ANT2 / S1U-DC24-ANT2
Channel: 1 CH
Control Modes: Toggle, Momentary, Latched
Coding Type: Fixed code or learning code
Coding Setting: By learning
Power Supply (Operating Voltage): DC6V (S1U-DC06-ANT2), DC12V±1V (S1U-DC12-ANT2), DC9V±1V (S1U-DC09-ANT2), DC24V±1V
(S1U-DC24-ANT2)
Working Voltage Range of Relay: AC110~240V or DC0~28V
PCB size: 67mm x 50mm x 18mm
Case size: 75mm x 54mm x 27mm
Static Current: ≤6mA
Maximum Working Current: 10A
External Extend Antenna:
Frequency Range: 300~450MHz
Impedance: 50Ω
Antenna Length: 15cm
Cable Length: 150cm
Weight: 35g
Anti-interference, waterproof, shielded wire set inside
Magnetic stand design for easy to install
Transmitter:
Model No.: CB-2L
Channel: 2 CH
Remote Control Distance: 1000m / 3000ft (theoretically)
Encode: EV1527 Learning code (up to 1 million codes, reducing code collision and unauthorized code scanning possibilities.)
Unit size: 135mm x 42mm x 25mm
Power Supply: 1 x 6F22-9V battery (included, can be used for 12 months)
Usage:
Setting different control modes (We have set the receiver as Toggle control mode before delivery. If you want to use other control modes, do as
following operation):
Setting control mode Toggle: Connect Jumper-2.
Control mode Toggle: Press -> On; Press again -> Off.
Press big button: Turn on the relay (connect B and C, disconnect A and B)
Press big button again: Turn off the relay (disconnect B and C, connect A and B)
Setting control mode Momentary: Connect Jumper-1.
Control mode Momentary: Press and hold -> On; Release -> Off.
Press and hold big button: Turn on the relay (connect B and C, disconnect A and B)
Release big button: Turn off the relay (disconnect B and C, connect A and B)
SHENZHEN GUIYUAN INDUSTRY DEVELOPMENT CO.,LTD
Http://www.carymart.com E-Mail: sale@carymart.com