Advertisement
Quick Links
CARE AND CLEANING INSTRUCTIONS
> The seat and cover should be cleaned using warm soapy water.
> DO NOT use aggressive or abrasive cleaners as this may scratch the surface of the seat.
> The hinges should be cleaned using soap or mild detergent.
> After cleaning, the hinges should be rinsed in clean water and dried.
> NEVER use bleach, concentrated cleaners or acids on the seat or hinges as this will cause
discolouring of the seat and hinges.
> DO NOT leave bleach in the toilet bowl with the cover closed because it may cause
discolouration of the seat ands hinges.
Please read carefully before starting to fit the toilet seat
!
Fitting Instructions for Blossom (A05654),
Lily (A05652) and Daisy (A05657) Soft Close
Quick Release top Fix hinge with Lock+
Advertisement
Related Manuals for Nabis Blossom
Summary of Contents for Nabis Blossom
- Page 1 Fitting Instructions for Blossom (A05654), Lily (A05652) and Daisy (A05657) Soft Close Quick Release top Fix hinge with Lock+ CARE AND CLEANING INSTRUCTIONS > The seat and cover should be cleaned using warm soapy water. > DO NOT use aggressive or abrasive cleaners as this may scratch the surface of the seat.
- Page 2 COMPONENTS SLOW FAST Comes with standard adjustment (15 to 20 seconds). Clean stainless steel cover with soap regularly. Adjust closing speed to preference. For faster close adjust towards + DO NOT use detergent! For slower close adjust towards -.
- Page 3 STEP 1 Tilt oval washer to pass bolt, washer and nut through w/c pan holes. STEP 2 Pull hinge upwards whilst tightening until Please use an adjustable almost tight. Allow room for re-positioning spanner if required. when seat is fitted (see pic 4).
- Page 4 STEP 3 Place hinge A and hinge B in to the relevant holes. Hinge A controls the cover, Hinge B controls the seat. Speed of closure is adjustable when fitting is complete. STEP 4 STEP 5 Position the hinge base so...