Advertisement
Quick Links
Installation Guide for UBR-series
UBR-300
SAFETY INSTRUCTIONS
1. Only entrust loudspeaker mounting equipment to experienced professionals. Also strictly follow the provided safety instructions.
Improperly installed mounting equipment may result in property damage, personal injury and/or liability for the installing
contractor.
2. Always use safety cables! This will prevent equipment from falling during/after setup and while exploiting.
3. Always check if the wall surface is structurally strong enough to support load. Make sure the wall and/or ceiling structure allows
to hold the weight of the speaker including its bracket.
4. Only use appropriate fasteners.
5. Always make sure to securely use and tighten/lock all mounting bolts provided. Loose bolts may become unscrewed over time
due to vibration which could potentially create a safety hazard when not tightened securely.
www.mnmounting.com
info@mnmounting.com
2 Merezhna str., Bila Tserkva,
Kyiv region, 09100, Ukraine
Installation Guide
UBR - series
U-bracket
Models:
UBR-500
Advertisement
Related Manuals for Mounting Solutions UBR Series
Summary of Contents for Mounting Solutions UBR Series
- Page 1 Installation Guide UBR - series Installation Guide for UBR-series U-bracket Models: UBR-300 UBR-500 SAFETY INSTRUCTIONS 1. Only entrust loudspeaker mounting equipment to experienced professionals. Also strictly follow the provided safety instructions. Improperly installed mounting equipment may result in property damage, personal injury and/or liability for the installing contractor.
- Page 2 Installation Guide UBR - series Installation Instructions UBR on wall/ceiling: 2. For direct wall/ceiling mounting, use the adjacent holes on the mounting 1. First, remove the bolts and glue the plate. For convenience, use this strip to spacers to the speaker mount. mark the holes on the wall/ceiling.
- Page 3 Installation Guide UBR - series 6. Adjust the pan and tilt angles of the loudspeaker as required and tighten 4. Loosen the fixing screws on the the screws to lock in the position of the speaker, and slide the speaker onto the loudspeaker.
- Page 4 Installation Guide UBR - series 4. Loosen the fixing screws on the speaker, and slide the speaker onto the 3. Attach the U-bracket to the WBM-1. U-bracket. 4. Adjust the pan and tilt angles of the loudspeaker as required and tighten the screws to lock in the position of the loudspeaker.
- Page 5 Installation Guide UBR - series Installation Instructions UBR with CMT-HS: 2. Attach the CMT-HS to the U-bracket, 1. First, unscrew bolt «1» and bolts «2». without tightening the bolts. 3. Adjust the width of the U-bracket 4. Attach the CMT-HS with the according to the width of your speaker U-bracket to the distance tube.
- Page 6 Installation Guide UBR - series 6. Adjust the pan and tilt angles of the loudspeaker as required and tighten 4. Loosen the fixing screws on the the screws to lock in the position of the speaker, and slide the speaker onto the loudspeaker.