Charging Instructions Normal charging procedure (Scenarios A and B) 1. Press the Yellow power indicator button to display estimated remaining power when battery is not plugged into charger. 2. Connect charger to battery pack. Only use charger provided. 3. Connect the AC power cord to charger, then plug AC power cord into electrical outlet. 4.
Installation Instructions If you purchased reclining furniture , please proceed to Scenario C below. Powered by FreeMotion Scenario A (floor install without PB bracket) Battery pack sits on floor underneath reclining mechanism and attaches to motor cable underneath recliner. When connecting multiple independent recliners, please refer to additional instructions included in your purchase of FreeMotion Y1, Y2 or Y3 cables.
Page 5
Other Important Information 1. Should your battery remain unused for an extended period, it may require several charging cycles before reaching peak performance. 2. Fully charged and unused mobile power sources are recommended to be recharged every 6 months. The storage temperature should remain between 32-100 degrees Fahrenheit (0-38℃ ). Absolute humidity should remain between 45%-85%.
Troubleshooting 1. For your safety, battery pack includes short circuit and overload protection systems. Should the system experience either a short circuit or overload situation, power will be cut automatically. Unplug the battery pack from motor, wait 3 minutes, then fully charge battery pack before reconnecting to motor.