Summary of Contents for i-Lift equipment ESF Series
- Page 1 Instruction Manual SELF-PROPELLED ELECTRIC LIFT TABLE Model: ESF&ESM Series Note: Owner/Operator must read and understand this instruction manual before using the lift table.
- Page 2 SELF-PROPELLED ELECTRIC LIFT TABLE Model ESF50,ESF50D,ESM50,ESM50D,EDM80,ESM80D/91D Instruction Manual READ THIS OPERATION MANUAL COMPLETELY BEFORE USING.THOROUGHLY UNDERSTAND AND FOLLOW ALL SAFETY INSTRUCTIONS.IF THIS IS LOST, PLEASE CONTACT YOUR LOCAL SUPPLIER FOR A NEW COPY.IF THE WARNING/CAUTION DECAL ON THE UNIT IS LOST, PLEASE CONTACT YOUR LOCAL SUPPLIER FOR A NEW COPY.
- Page 3 1.6 Danger area Danger area refers to the area where the lift table or its lifting device (such as fork or attachment) is working or lifting, which brings potential dangerous factors to persons or the area for load transportation. Generally, the range of danger area extends to the point of load lowering or truck attachment lowering.
-
Page 4: Daily Inspection
The self-propelled electric lift table will only be driven with the height of lift table platform to the lowest position except when placing or removing a load. 1.16 Load characteristics The cargo should be carried correctly, safely and reliably. Carrying a cargo with stacking-height exceeding top of platform or protection shield is strictly forbidden. -
Page 5: Name Of Parts
3.NAME OF PARTS ESF Series Control Switch Control Sw Platform Scissor Unit Handle Base Unit Anti- Collision Wheel Foot Brake Transaxle Control switch Platform Handle Bar Scissor Unit Anti-Collision Steerable wheel Wheel Base Unit Fixed Support Brake Unit... -
Page 6: Operating Lift Table
4. OPERATING LIFT TABLE How to use the brake. CAUTION Brake lift table when not moving it in order to prevent sudden movement. The brake is equipped with the swivel caster on the right side. (Only for ESF model),ESM model is equipped with fixed Support Brake unit. -
Page 7: Charging The Battery
CAUTION DO NOT lower table with load too fast and stop suddenly. Impact load could be created and lifter could be damaged. Push the button DOWN. 7.MOVING THE LIFTER WARNING DO NOT move lifter on slope or inclined surface, otherwise lifter become uncontrollable and create danger. -
Page 8: Specifications
SPECIFICATIONS Model ESF50 ESF50D ESM50 ESM50D ESM80 ESM80D/91D Capacity (kg) 800/910 Table Size ( LxW) 1020X610 1020X610 1020X610 1020X610 1020X610 1020X610 Platform Height (Max/Min) mm 1000/460 1720/460 1000/460 1720/470 1075X460 1850/520 Lifting Cycle Time(Max. Lifting/Lowering) sec 15/15 15/15 15/15 15/15 15/15 15/15 Wheel...