Page 2
HOW TO CHANGE BATTERY Use screwdriver to take the Open battery cover as Change battery Battery cover screw out. indicator shows INSTRUCTION MANUAL Pataco AG Looäcker 1 CH-9247 Henau, Switzerland www.pataco.com - info@pataco.com Int. Freecall: +800 72 82 26 24...
Page 3
APPLICATION WITH GLUE STRIPE The surface of merchandise and Turtle has to be cleaned with an alcohol pad to ensure maximum glue force. INSTRUCTION MANUAL Pataco AG Looäcker 1 CH-9247 Henau, Switzerland www.pataco.com - info@pataco.com Int. Freecall: +800 72 82 26 24...
Page 4
Take off TURTLE from and press to open the TURTLE. from tape clamp, hold the Turtle merchandise. tightly and pull the glue stripe horizontally INSTRUCTION MANUAL Pataco AG Looäcker 1 CH-9247 Henau, Switzerland www.pataco.com - info@pataco.com Int. Freecall: +800 72 82 26 24...
Page 5
Same as step 1 to step 3 of "How to realease - Application with Glue Stripe". HOW TO REALEASE THE SENSING HEAD Take off the glued sensor by rotating the sensor head. INSTRUCTION MANUAL Pataco AG Looäcker 1 CH-9247 Henau, Switzerland www.pataco.com - info@pataco.com Int. Freecall: +800 72 82 26 24...
Page 6
• Pre-Alarm sensivity: Position 1: low sensitive (alows larger movements without alarming) Position 2: medium sensitive (delivery status) Position 3: high sensitive (alarm is triggered by small movements) INSTRUCTION MANUAL Pataco AG Looäcker 1 CH-9247 Henau, Switzerland www.pataco.com - info@pataco.com Int. Freecall: +800 72 82 26 24...