Summary of Contents for Bridge-Medical 4" Tile Grip
- Page 1 Portable Grab bar 4" Tile Grip SinGle Grip TeleScopinG Grip TeleScopinG piVoT Grip www.bridge-medical.com...
- Page 2 STOP! READ BELOW BEFORE USE! All users should read the owner’s manual before use for specific instructions and liability warning! This product is for use on flat and smooth non-porous surfaces. It is not for use on drywall or any other porous surface. Before attaching to approved surface, the user should verify that the surface itself is in good condition (e.g.
- Page 3 safety tIPs & WarnInGs > Before attaching, the user should verify that the surface is in good condition (i.e. tile secured properly to wall). If surface is worn, loose or in disrepair, the grab bar should not be used on surface under any circumstances. >...
- Page 4 How to install your Portable Grab bar ASSemBle PRODuCT (For products with removable handles) lightly press in metal make sure pin snaps line up metal pin pin and insert into through the pin hole with receiving end receiving end Inspect mounting surface thoroughly before attaching.
- Page 5 Push down on lever to engage the second vacuum seal: you should feel the vacuum pressure resistance. Verify firm attachment to surface before each use. If insufficient, repeat steps 1-3 until satisfied. To remove handle from surface, CAReFullY lift both levers to release vacuum seal. levers may have built up pressure, which is normal.
- Page 6 Get all versions for complete versatility.
- Page 7 It will be at Bridge-medical’s option to replace or repair defective merchandise. Normal wear and tear to non-durable components like rubber, consumer misuse, and neglect are not covered under this...
- Page 8 2009 Bridge companies, inc. All rights reserved www.bridge-medical.com...