Flexcon Flex 2 Pro PH Series Installation, Warnings, And Operation Instructions

f i l
l e x c o n n d u s t r i e s
P c : t e t
roducts overed hermal xPansion anks
important: Read carefully the installation, operating and maintenance instructions manual ("Manual") to avoid serious personal injury and/or
property damage and to ensure safe use and proper care of this Product.
Warranty - Warranty is extended to all purchasers of the new product. The warranty is non-transferable. Flexcon warrants to the purchaser or first
user of the new Product that at the time of manufacture, the Product is free from defect in material or workmanship for one (1) year from the date
of manufacture. Any warranty claim must be made within one (1) year (unless another time period is set forth in the Manual), measured from the
date of manufacture.
In the event of a breach of the foregoing warranty and upon proper and timely notification to Flexcon, Flexcon will at its option either: make
repairs to correct any defect in material or workmanship, or supply and ship either new or used replacement parts or products. Flexcon will not
accept any claims for, nor will Flexcon be responsible for, any other costs including labor.
exclusions - This warranty does not cover any failure or problem unless it was caused by a defect in material or workmanship. In addition, this
warranty shall not apply:
• If the Product is not correctly installed, operated, repaired or maintained as described in the Manual provided with the Product.
• To any failure or malfunction resulting from (i) misuse or abuse, (ii) improper or negligent handling, shipping (by anyone other than Flexcon),
storage, use or operation, or (iii) damages to the tank caused by lightning, floods, fire, freezing or any other environmental condition.
• To damages caused by any unauthorized alteration to the Product, or any attempt to repair tank leaks or parts.
• To any failure or problem resulting from the use of the Product for any purpose other than those specified in the Manual.
• If the Product is used anywhere except the United States, its territories or possessions, or Canada.
• To labor costs, shipping charges, service charges, delivery expenses, administrative fees or any costs incurred in removing or reinstalling the Products.
• To any claims submitted to Flexcon or a Flexcon authorized distributor or dealer more than 30 days after expiration of the applicable warranty time
period described in this Warranty;
• To any repair or replacement costs not authorized in advance by Flexcon.
Warranty limitations - All implied warranties including the implied warranties of merchantability and fitness for a particular purpose are
specifically disclaimed.
limitations of remedies - The remedies contained in this warranty are the purchaser's or first user's exclusive remedies. In no circumstances
will Flexcon be liable for more than, and purchaser-first user's remedies shall not exceed, the price paid for the Product. In no case shall Flexcon
be liable for any special, indirect, incidental or consequential damages, whether resulting from non-delivery or from the use, misuse, or inability to
use the Product or from defects in the product or from Flexcon's own negligence or other tort. These exclusions apply regardless of whether such
damages are sought for breach of warranty, breach of contract, negligence, strict liability, in tort or under any other legal theory. Excluded damages
include, but are not limited to, inconvenience, loss or damage to property, mold, loss of profits, loss of savings or revenue, loss of use of the
Products or any associated equipment, facilities, buildings or services, downtime, and the claims of third parties including customers.
What to do if you have a Problem covered by this Warranty – You must notify the authorized Flexcon distributor or dealer who sold you
the Product within 30 days of the event leading to the Warranty claim. Any covered Warranty service must be authorized by the Flexcon distributor
or dealer which sold you the Product. If you do not receive a prompt response, call Flexcon directly at 781.986.2424. Notice of a Warranty claim
should be submitted within 60 days of the event leading to the claim by the authorized distributor/dealer to Flexcon at the following address:
Flexcon Industries, Warranty Claim Dept., P.O. Box 782, Randolph, MA 02368
Before Flexcon determines to provide any replacement part or Product, it may, as a pre-condition to making such a determination, require that the
warranty claimant ship the Product, postage prepaid, to an authorized Flexcon distributor, or to Flexcon, and provide proof of purchase evidenced
by the original sales receipt.
replacement Product Warranty - In case of replacement of a Product or any component part, Flexcon reserves the right to make changes in
the design, construction, or material of the substitute components or products, which shall be subject to all of the terms and limitations of this
Warranty, except that the applicable warranty periods shall be reduced by the amount of time the warranty claimant owned the product prior to
submitting notification or the warranty claim.
Owners Record Keep for later use
Serial number (see tank data label at bottom of tank): __________________________________________________________________________
Model (see tank data label at bottom of tank): _______________________________________________________________________________
Date Installed: _________________________________________________________________________________________________________
Installer Name: _________________________________________________________________________________________________________
Telephone number: ____________________________________________________________________________________________________
Retain copy of cancelled check and installation receipt
300 Pond Street, Randolph, Massachusetts 02368, Call 1.781.986.2424, Fax 1.781.986.2029, www.flexconind.com
P W
i m i t e d r o d u c t a r r a n t y
m d f i
anufactured and istributed by lexcon ndustries
o
Peration
This thermal expansion tank is designed to maintain safe
water pressures in a domestic water heating system that
utilizes a backflow preventer or check valve. It features a
butyl rubber diaphragm and polypropylene liner to sepa-
rate the system water from the tank's inner walls and
pre-charge. The system connection is stainless steel
and the tank is finished with an appliance quality paint to
minimize corrosion.
W
hat it does
Adding a backflow preventer, water meter with a check
valve, or any other "no return" valve to a domestic water
heating system creates a closed loop system. When water
heats up, it expands which can cause unsafe operating
pressures and cause nuisance operation of the water
heater's safety relief valve.
Adding a thermal expansion tank to the cold water inlet
of the water heater creates a reservoir for the expanded
water. Water enters the tank and is released back into the
system on demand. The goal is to avoid dripping relief
valves and improve the safety of the system.
this is the safety alert symbol. it is used
to alert you to PoteNtial PersoNal iNjury
hazards. obey all safety messages that
follow this symbol to avoid Possible
iNjury or death.
iNdicates a PoteNtially hazardous situa-
tioN which, if Not avoided, could result
iN serious iNjury or death.
iNdicates a PoteNtially hazardous situa-
tioN which, if Not avoided, may result iN
miNor or moderate iNjury or result iN
ProPerty damage.
Note: PH Series tanks are certified to NSF Standard 61
Domestic Hot, but are suitable for temperatures up to 200
© 2014 Rev. 1.23
i , W ,
nstallation arninGs
f 2 P , P
lex ro otable
WarninG
stalled by a Qualified Professional fol-
lowing all local and national plumbing and
electrical codes. Read and understand
fully the instructions included here and
those on the Flexcon website which are
updated on a regular basis. This product
must be inspected annually by a qualified
professional for any signs of corrosion or
leakage and replaced immediately if these
signs are present. Failure to follow these
instructions may result in serious injury or
death and or property damage and will void the product warranty.
WarninG
maximum pressure of 150 psi and a maximum temperature of 200 F.
A properly sized pressure relief valve set at a maximum of 150 psi must
be installed in the system. This tank is shipped with a pre-charge of 40
psi and any adjustment to the pre-charge must be done prior to
installation and at ambient temperature. Do not adjust the pre-charge of
this tank if the product is corroded or damaged or shows any signs
of diminished integrity. The maximum allowable pre-charge in this
expansion tank is 80 psi. Do not adjust the pre-charge of the expansion
tank with the system under pressure. Failure to follow these instructions is
UNSAFE and may result in serious injury or death and or property damage.
c autio n
installed in a location that allows for easy access, visual inspection and
where water leakage will not cause property damage. Installation must
include a means for adequate drainage. This tank must not be installed
in a location that is subject to freezing. This tank must be installed in the
vertical position. The manufacturer of this product is not liable or
responsible for any water damage associated with the installation and or
failure of this product. Failure to follow these instructions will void the
warranty and may result in personal injury or property damage.
WarninG
WarninG
be dangerous and will void the warranty. This product's performance and
lifespan can be significantly and adversely impacted by aggressive water
conditions. A water test should be conducted at regular, periodic intervals
specifically looking for corrosive water, acids and other relevant water
contaminants which if present must be treated immediately and appropri-
ately. The system piping must be properly grounded to earth and a di-
electric union is recommended in the installation. Failure to
c autio n
follow
instructions may result in serious injury or death and or property damage.
WarninG
WarninG! This product contains a chemical known by the State of
California to cause cancer and birth defects or other reproductive harm.
(California installer-California law requires that this notice be given to the
consumer/end user of this product.) For more information, contact the
manufacturer at www.flexconind.com.
These instructions and warnings are subject to periodic updates on the
Flexcon website www.flexconind.com and should be regularly reviewed
o F.
by the consumer for important safety and instruction updates.
300 Pond Street, Randolph, Massachusetts 02368, Call 1.781.986.2424, Fax 1.781.986.2029, www.flexconind.com
o i
and Peration nstructions
W e t
ater xPansion anks
This product
must be in-
P h s
e r i e s
Explosion Hazard This expansion
tank is designed for water storage at a
This expansion tank and the associated
piping may in time leak. This tank must be
This tank is intended for use on potable
water systems only and any other use may
these
C a l i F o r n i a p ro p o s i T i o n 6 5
© 2014 Rev. 1.23