Page 2
All cutout dimensions below are in inches and provide 1/4” total tolerance vertically and horizontally. Be careful not exceed the dimensions shown. Cutout Dimensions Models Width Height Depth CH-DO1-18; AD1-(18S/18C/18LR/ & 18LL) 17.25 21.25 3.25 CH-DO2-30; AD2-(30S/ 30C/ & 30L) 29.25 21.25 3.25...
Page 3
Installing Drawers: a. Install Handles on Drawer Fronts and carefully set them aside. b. Place the Drawer or Combo Chassis at a comfortable working height. Take Adjustment Tab care not to damage the beveled fl ange around the face of the chassis. c.
Page 4
Adjusting Doors: 33951 Valencia Place Dana Point, CA 92629 info@pacifi cteakmillworks.com www.pacifi cteakmillworks.com IN2 519...
This manual is also suitable for:
Ad1-18sAd1-18cAd1-18lrAd1-18llCh-do2-30Ad2-30s...
Show all