Advertisement
Quick Links
Advertisement
Summary of Contents for BTSX BIT-EX-GS
- Page 1 深圳市比特视讯有限公司 深圳市比特视讯有限公司 BIT-EX-GS HDMI Extender 第 1 页 共 7 页...
- Page 2 深圳市比特视讯有限公司 CATALOG 1. Product Overview ......................3 1.1. Product features ..................... 3 1.2. Application scenarios .................... 4 2. Specifications ........................4 3.Operation instructions ....................5 3.1. Product connection diagram ................5 4. Common problem ......................6 4.1. Power supply and connecting wire problems ..........6 4.2.
-
Page 3: Product Overview
深圳市比特视讯有限公司 1. Product Overview 1.1. Product features BIT-Ex-GS has two working modes, support CAT5E/6 expander and HDMI l oop-out.Support 4K * 2K @ 60Hz resolution transmission, downward com patible with low resolution. BIT-Ex-GS-4k60 in expander mode, the internal video compression codec c... -
Page 4: Specifications
深圳市比特视讯有限公司 Support YCbCr444, YCbCr420, RGB. Cornerstone Network Transmission supports network cable power supply POE, only need to supply 12V power to a single (TX/RX) device. Using pure hardware design architecture, plug and play, without any softw are driver. 1.2. Application scenarios Multi screen display project, multi-channel projection fusion project, LCD splicing wall, exhibition project, etc. -
Page 5: Product Connection Diagram
深圳市比特视讯有限公司 Data bits 8 bits Interface Standard RJ45 interface Mesh port 4k60Hz: Cat6 network cable 70 meters Recommended maximum transmission distance 4K30 Cat6 network cable 100 meters Power DC 12V/1A Maximum power consumption Temperature Working temperature：-5℃~+70℃ Other Humidity Working humidity：5%~90% Outline size 135*85*26mm Quality assurance... -
Page 6: Common Problem
深圳市比特视讯有限公司 4) RX (Receive) is the receiving end. 5) The receiving end (RX) is connected to a display device (LCD TV, projector, digital signage, advertising machine, etc.). 6) The extender device is connected to 12V power supply. 7) If the display device has an image output, the connection is successful. 4. - Page 7 深圳市比特视讯有限公司 provided by this product. (2) check whether the network cable is inserted stably (the network cable shall be clamped well. 4.2. problem of signal source 1) check whether the output of the signal source is normal, and connect the signal source directly to the display equipment that can be used normally.