Download Print this page

Yoshimura DH35-45-PW Instruction Manual

Dh stem kit

Advertisement

Quick Links

5420 DANIELS STREET STE A, CHINO CA., 91710 · (800) 634-9166 · (909) 628-4722 · FAX (909) 591-2198
READ THIS MANUAL BEFORE
!
INSTALLING STEM KIT
WARNINGS TO USERS & PARENTS / GUARDIANS
Proper installation and use of this stem in accordance with the
manual are essential for the safety of all users.
Parents/Guardians must ensure that the correct procedures for
installation and use of this product are followed and understood by
the minor.
Misuse or failure to follow the specified installation instructions and
heed warnings may result in injury or death.
WARNING
Always wear a helmet and follow trail etiquette when riding.
WARRANTY
All Yoshimura stem kits carry a one-year limited warranty against
defect in workmanship and/or materials and is only provided to the
original purchaser. Original receipt or invoice will be required for
processing.
Damages caused by abuse, misuse, lack of service, improper
installation and/or modifications are not covered under this warranty
and are specifically disclaimed.
For more warranty information, please visit
www.yoshimuracycling.com.
Stem kit is pre-assembled out of the box with all
!
bolts hand-tight.
Remove all bolts and apply grease to threads
when installing.
www.yoshimuracycling.com
!
DH Stem Kit
Part #
DH35-45-PW
45mm Stem Kit, Pewter
DH35-50-PW
50mm Stem Kit, Pewter
DH35-55-PW
55mm Stem Kit, Pewter
DH35-45-YK
45mm Stem Kit, Yoshikote
DH35-50-YK
50mm Stem Kit, Yoshikote
DH35-55-YK
55mm Stem Kit, Yoshikote
CARE & MAINTENANCE
In the event of a crash inspect for wear, damage, or loose
components.
Periodically clean dirt & debris off stem.
Contact Yoshimura Tech Department at (800) 634-9166 / in CA
(909) 628-4722 or visit www.yoshimuracycling.com.
Single Crown Reach
Description
DH Direct Mount Reach

Advertisement

loading

Summary of Contents for Yoshimura DH35-45-PW

  • Page 1 Periodically clean dirt & debris off stem.  Always wear a helmet and follow trail etiquette when riding.  Contact Yoshimura Tech Department at (800) 634-9166 / in CA (909) 628-4722 or visit www.yoshimuracycling.com. WARRANTY  All Yoshimura stem kits carry a one-year limited warranty against defect in workmanship and/or materials and is only provided to the original purchaser.
  • Page 2 Installation 5. Torque the four clamp base bolts to 10 Nm. 1. Clean handlebar. Note: There should be no gaps between clamp base and 2. Grease 6mm x 16mm bolts and install clamp base directly upper clamp as shown. to front fork. Do not torque at this time. M6X16TP 3.

This manual is also suitable for:

Dh35-50-pwDh35-55-pwDh35-45-ykDh35-50-ykDh35-55-yk