Speed Setting Power On/Off Ergonomic Handle Polishing Supplied with 1x Polisher 1x Polishing Pad 1x Wrench Technical Specification Important: For your safety, please read the entire instruction manual carefully and make sure that you fully understand it before you use the equipment. It is recommended that you keep the manual for future reference.
Page 3
• Do not use power tools in explosive environments, such as in the presence of flammable liquids, gases or dust. • Keep children and other bystanders away from the area where you are using the power tool. • Wear personal protective equipment as appropriate including safety googles and a dust mask.
Page 4
Polishing Safety Instructions This power tool is intended for the purpose of polishing and buffing. Read all safety warnings, instructions, illustrations, and specifications provided. Failure to adhere to all of the following instructions can result in electric shock, fire and/or serious injury.
Page 5
Using the Polishing Machine • Make sure that the polishing wheel is securely fastened to the spindle. • Make sure that the polishing wheel can be turned by hand. Before use, always ensure that the surface to polish has been thoroughly washed and is free of dust, dirt, oil and grease.
Page 6
The Polisher has a variable speed control setting. Always start using the slowest speed to get the best results. The polishing pad can be changed as required. Ensure that the Polisher is turned off at the mains before changing the pad. The polishing sponge should be centred on the backing pad.
Troubleshooting Problem Possible Cause Likely Solution Check the power cord is plugged in. Check the The power cord is not power at the mains. If there The Polisher plugged in. There is an issue is no power, check the will not start at the mains power supply.