Page 1
Owner’s Manual pages referenced in this guide. We strongly recommend that you read the Owner’s Manual for complete details on how to install, configure and operate the AVR 235, as well as for the important safety information it contains.
Page 2
SPEAKER SPEAKER Step 2. Connect the speakers to the receiver: red (+) on speaker to colored (+) on receiver and black (–) to black (–) (see page 14). Step 3. Connect the Subwoofer Pre-Out jack to the Line-In jack on your subwoofer.
Page 3
12 o’clock, and the Volume to –10dB. Sit in the listening position and hold the remote in front of you at shoulder level, pointing at the AVR 235. Press the SPL button for 3 seconds, and release it when the LED flashes amber. Press “5” or “7” to indicate the number of speakers (not including the subwoofer).
Page 4
Coax Device Connection Options : Recommended connections are shown in red, but connections may be made to best fit your system requirements. The Video 4, Coax 3 and Optical 3 inputs are on the front panel of the receiver. Device...