ASSEMBLY GUIDE Connect garden walls with corner columns to base feet. Ensure the holes are located at the top of the wall. Connect the corner brackets on all 4 corners. Anchor the garden to the ground on the bottom of all 4 corners.
Page 5
ASSEMBLY GUIDE (Continued) Thread rope through the hole, and out of the slot at the top of the wall. Stretch the rope across the length of the garden, through the slot on the opposite wall. Thread through the hole and continue pattern for the remainder of the garden.
Page 6
CANOPY/COVER ASSEMBLY (FOR MODEL OGGB-39WC) ITEM QTY. Top center connecter Fiberglass rods clear pvc canopy cover Place the berglass rods into the holes at each corner, and connect them on top with the center connector, creating an arch from the corners to the center.