Advertisement
Quick Links
User manual of KL3000-1 KL3000-2 KL3000-4 KL3000-8
KL3000-12
RF Remote Control
Parameter:
Working Voltage：DC9V
Working Current：70mA
Frequency：433.88MHZ
Modulation：ASK（ASK）
Temperature：-20-55℃
Dimension：49*31*8mm
Weight : 9.6g
Encode type: Learning code
Operation Method:
1. Match code:
Hold learning button and learning indicator light blinks, then press any buttons of remote control,
if indicator lights flashes 3 times, match code successfully. Maximum 80 remote controls can be
matched.
2. Delete code:
Hold learning button till the indicator LED lights and then off, delete successfully.
3. Set working mode:
S1 & S2 program the sequence as follows:
Jumper on S1→ Toggle
Advertisement
Related Manuals for Kelvin Electronics KL3000-1
Summary of Contents for Kelvin Electronics KL3000-1
- Page 1 User manual of KL3000-1 KL3000-2 KL3000-4 KL3000-8 KL3000-12 RF Remote Control Parameter: Working Voltage：DC9V Working Current：70mA Frequency：433.88MHZ Modulation：ASK（ASK） Temperature：-20-55℃ Dimension：49*31*8mm Weight : 9.6g Encode type: Learning code Operation Method: 1. Match code: Hold learning button and learning indicator light blinks, then press any buttons of remote control, if indicator lights flashes 3 times, match code successfully.
- Page 2 Jumper on S2→ Latched No Jumper on S1 &S2→ Momentary Working Mode: 1. Non-lock/Momentary: Press remote button A, the corresponding relay on the receiver is on; release button A, the relay is off, the same as others. 2. Self-lock/Toggle: Press remote button A, the corresponding relay on the receiver is on; press button A again, the relay is off, the same as others.