GlacialLight GL-SD07 Series User Manual

GL-SD07
Users' Manual
Thank you for choosing the GL
Please install and use the products according to the following
directions to ensure normal functioning and proper operation of
the products. If not to follow these instructions to properly
install and normally use the products, you will not get the
warranty committed
-
compensation or
protection. GlacialLight
will not take any
responsibility for any
product damage caused
by improper installation
or abnormal usage.
Installation Steps
1. Before installation, please 2. Please make sure that both the DC
turn off the power switch for voltage source and the power
the existing lamp. connector are compatible with the
GL-SD07 series LED products. The
DC voltage source may be provided
by an AC adapter, a DC battery, and
so on as long as it meets the
specifications.
Specifications
Optical
Model No.
CCT (Typical)
Luminous Flux (lm)
Typical Luminous Efficacy
CRI (Ra)
Beam Angle
Mechanical and Dimension
Outline Dim.
Net. Weight
Cover
Electrical
Typical Power consumption
Input Voltage
Input Current (Max.)
Temperature Condition
Operating Temperature
Storage Temperature
SD07 series LED products.
-
Installation procedure should be undertaken by qualified technical personnel.
GL-SD07
12/24V DC 9W IP64
GL-SD07-WW
GL-SD07-CW
(Warm White)
(Cool White)
3000 K 6000 K
350 lm 500 lm
39 lm / W 56 lm / W
> 80 > 75
30° / 60° (Optional)
140 × 140 × 85 (mm)
0.60 (Kgs)
Clear
9W
11-15V DC / 22-30V DC
1.1A at 11V DC / 0.55A at 22V DC
-20 °C － +40 °C
-40 °C － +85 °C
CAUTIONS
1. The warranty period will last for two years since your purchase of the
products. If the product fails or malfunctions under the proper
installation and normal usage within the warranty period, please send it
back to our company with our RMA approval or contact your local
distributors for free repairing and/or replacing services.
2. Please do not add/remove any electrical components to/from
the products or change/tamper the original electrical design without our
permission.
3. Please do not add/remove any mechanical components to/from the
products or change/tamper the original mechanical design without our
permission.
4. Please store or use the products in an environment that meets the
temperature and humidity conditions designated by the product
specifications. Please do not uncover the GL
products, lest waterproof and dustproof become invalid.
5. To avoid any electrical shock or functional damage, please do not
insert any foreign objects into the products.
6. For further information, please contact us.
CAUTION
CLASS 2 LED LIGHT
Do not stare at the beam.
3. The GL-SD07 series LED products feed only on
a DC voltage source having an appropriate
output voltage designated by the product
specifications. Please connect respectively the
Brown (+) and Blue (-) wires/terminals at the rear
side of the GL-SD07 series LED products to the
Positive (+) and Negative (-) wires/terminals of
the DC voltage source. It depends on the model
in use that the Brown (+) and Blue (-) wires may
be not screwed or screwed internally onto a
terminal block. Misusing an inappropriate voltage
source or reversing the correct voltage polarity
may lead to product damage.
(+) Brown
(-) Blue
GL-SD07 Outlook
SD07 series LED
-
Please be aware of
the correct DC
polarity before use.
4. Please insulate properly the wires/terminals
of the DC voltage source, screw tightly the
GL-SD07 series LED products onto a wall
or a stand, and adjust freely the lighting
angle in accordance with individual needs.
5. Please turn on the DC voltage source to check
whether the GL-SD07 series LED products
can work normally. If not, please check
carefully whether all the above installation
steps are taken and usage conditions are met.
140.0 mm
85.0 mm