KETCHAM AURORA Series Installation Manual

LED MIRROR
INSTALLATION GUIDE
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical product, basic precautions should
always be folllowed, including the following:
To reduce the risk of burns, fire, electric shock, injury or death,
use this product only for its intended use as described in these
instructions. Do not use attachments not recommended by the
manufacturer. Never drop or insert any object into any opening.
Installation should be done by a licensed professional.
Failure to follow proper installation will void warranty.
Risk of electric shock. Connect this product to a properly
grounded circuit only. See grounding instructions below.
This product must be connected to a grounded metal,
permanent wiring system, or an equipment-grounding
conductor must be run with the circuit conductors and
connected to the equipment-grounding terminal or lead
An electrical option mirror must be wired to a 20 Amp GFI
(Ground Fault Interrupter) protected circuit when used in
PLEASE SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
!
WARNING
Do not use outdoors.
!
WARNING
!
WARNING
Grounding Instructions:
on the product.
!
WARNING
bathrooms and all other locations required by the
National Electric Code.
AURORA SERIES, AURORA+ SERIES
LUMINOUS SERIES, LUMINOUS+ SERIES
RADIANT SERIES, RADIANT+ SERIES
STELLAR SERIES, STELLAR+ SERIES