W&H proxeo Ultra PB-530 Additional Information

Additional information
One control unit – two devices
Controlling Proxeo Ultra PB-530 and Proxeo Twist PL-40 with one foot control
Pairing C-NW foot control with PB-530 control unit
Set power regulator to 'OFF'

Connect the cable to the control unit

and foot control
> 1. LED flashes orange/red = not paired

Press function button for

> Sequential white LED during pairing
> 1. LED flashes white = pairing successful
 Disconnect the cable from the control unit
and foot control

Pairing C-NW foot control with PL-40 handpiece drive
5 seconds
Press ON/OFF button for 5 seconds

LED flashes green
> LED flashes green = handpiece drive is in
pairing mode for 30 seconds
Use the stick to press the pairing button on the

3 seconds
foot control (underside) for
> After 3 seconds the status LED switches from
flickering to flashing = pairing active
>
LED lights up green = pairing successful
> LED flashes orange alternately =
pairing unsuccessful
until the
Page 1 of 2